Engineering Silt Cleaning Vehicle
This vehicle is suitable for municipal sanitation, large, medium and small industrial and mining enterprises, residential areas, schools, septic tank cleaning and transportation, urban pipeline cleaning and dredging, factory sludge cleaning, etc. In emergency situations, it can transport clean water for firefighting.
The suction truck is a new type of environmental sanitation vehicle that collects,
transfers, and cleans sludge and sewage to avoid secondary pollution. The back
cover can be opened and the tank can be lifted for easy unloading. It has a fast
working speed, large capacity, and is suitable for collecting and transporting liquid
substances such as feces, mud, and crude oil.
【Technical parameters of the entire vehicle】 | |||
Product trademark | Xiangnongda brand | Product model | 333 |
Product Name |
Tank volume (m3) | SGW5163GXWF | |
Total mass (Kg) | 16000 | External dimensions (mm) | 10.52 |
Rated load capacity (Kg) | 8405 | Cargo size (mm) | 7700,8050×2500×3300 |
Curb weight (Kg) | 7400 | Total mass of quasi trailer (Kg) | ×× |
Rated passenger capacity (person) | Maximum load capacity of saddle (Kg) | ||
Cab capacity (persons) | 3 | Front/rear suspension (mm) | |
Approach Angle/Departure Angle (degrees) | 20/11,20/10 | Maximum speed (km/h) | 1235/2265,1235/2315 |
Axle load (Kg) | 5400/10600 | Product model | 80 |
remarks | Special equipment for this vehicle: tank and pump, mainly used for sewage sludge suction, cleaning, loading and unloading, etc. Transport medium: liquid sewage, medium density: 800 kg/cubic meter; Effective volume of tank: 10.52 cubic meters. Corresponding relationship between vehicle length (mm)/wheelbase (mm)/tank external dimensions (straight section length × diameter) (mm): 8050/4500/4700 × 17007700/4200/4400 × 1700. Protective material: Q235, connection method: welding connection is used for both side and lower rear protection, and the cross-sectional size of lower rear protection (mm) is 120 × 50. Ground clearance height of lower rear protection (mm) is 440. The ABS model is CM4XL-4S/4M, and the manufacturer is Guangzhou Ruili Kemi Automotive Electronics Co., Ltd | ||
【Chassis Technical Parameters】 | |||
Chassis Model | BJ5164JQZHPDD-01 | Chassis name | Truck crane chassis |
Trademark name | Futian brand | manufacturing enterprise | Beiqi Foton Motor Co., Ltd |
Number of axes | 2 | Number of tires | 6 |
Wheelbase (mm) | 4200,4500,3700,3900 | ||
Tire specifications | 10.00R20 18PR,9.00R20 16PR | ||
Number of steel plate springs | 10/12+9 | Front wheel base (mm) | 1728,1740,1760,1780 |
Fuel type | diesel oil | Rear wheel base (mm) | 1760,1780,1728,1740 |
Emission standards | GB3847-2005,GB17691-2018 National VI | ||
Engine model | Engine manufacturing enterprises | Emissions(ml) | Power (Kw) |
WP3NQ160E61 WP4.1NQ190E61 | Weichai power company limited Weichai power company limited | 2970 4088 | 118 140 |
Product usage precautions ↓
1> The oil level in the oil-gas separator should not be lower than the middle position
of the observation hole or the tee position of the oil pipe, otherwise it will damage
the vacuum pump.
2> Apply antifreeze engine oil when the outdoor temperature is below 0 degrees
Celsius, and use diesel engine oil between 0 and 10 degrees Celsius.
3> When accidentally pumping sewage or manure into the pump, it should be
cleaned up and replaced with new engine oil in a timely manner.
4> It is strictly prohibited for objects other than air lubricating oil to enter the pump,
otherwise the responsibility shall be borne by oneself.
5> This pump cannot pump corrosive gases such as acid, concentrated alkali, and
other explosive gases.
Related News
Submitted successfully
We will contact you as soon as possible