Customizable Cleaning And Suction Truck
The cleaning and suction truck can effectively remove dirt and debris from pipelines and tanks through high-pressure water flow, strong suction, rotating brushes, and other means, providing efficient cleaning and suction services for municipal engineering and sewage treatment plants.
The cleaning and suction truck consists of a car chassis, a water tank, a cleaning
device, and a suction device.
1> The cleaning and suction truck, also known as the joint dredging truck, is a new type of
specialized sanitation vehicle that combines the functions of a high-pressure cleaning truck
and a suction truck. The highlight of this vehicle is the dredging of blocked areas in the
sewer that cannot be reached by human labor. Other functions of this vehicle include floor
flushing, sewage suction and discharge, manure transportation, landscaping, etc.
2> The cleaning and suction truck integrates flushing, dredging, suction, and reverse
discharge functions. It is used for the suction, transportation, and discharge of various
liquid and semi liquid liquids, as well as sludge, feces, wastewater, suspended debris
sludge, small bricks, gravel, and other media under various ditches. It can also be used
for emergency response to sudden environmental pollution accidents. This will greatly
improve the efficiency of cleaning and suction trucks and enhance their operational
apabilities. Breaking through the use of advanced technology from domestic and foreign
enterprises for cleaning and suction truck products, and fully utilizing vacuum technology
through digestion and absorption, the dual anti overflow pump device can better avoid
tank overflow and extend the service life of the vacuum pump. The overall design
structure of the vehicle is reasonable, with excellent performance and flexible and easy
operation. And on the basis of the sewage suction vehicle, a high-pressure cleaning
vehicle function has been added, which is dual-use, saving money and effort, and
cost-effective.
【Technical parameters of the entire vehicle】 | |||
Product trademark | Xiangnongda brand | Product model | 347 |
Product Name |
Tank volume (m3) | SGW5071GQWHF6 | |
Total mass (Kg) | 7360 | External dimensions (mm) | 3.34 |
Rated load capacity (Kg) | 2550 | Cargo size (mm) | 5995×2000×2630 |
Curb weight (Kg) | 4680 | Total mass of quasi trailer (Kg) | ×× |
Rated passenger capacity (person) | Maximum load capacity of saddle (Kg) | ||
Cab capacity (persons) | 2 | Front/rear suspension (mm) | |
Approach Angle/Departure Angle (degrees) | 24/14 | Maximum speed (km/h) | 1075/1555 |
Axle load (Kg) | 2640/4720 | Product model | 100 |
remarks | This vehicle is mainly used for sewage discharge and dredging, with the main devices being tanks and pumps. The effective volume of the sewage tank is 3.34 cubic meters, the medium is liquid sewage, the density is 800 kg/cubic meter, and the external dimensions of the tank body (straight section length x diameter) (mm) are 3100 × 1200. The effective volume of the clean water tank body is 1.58 cubic meters, the transport medium is water, the density is 1000 kg/cubic meter, and the cross-section of the clean water tank is composed of arcs and polygons. The external dimensions (length x width x height) (mm) are 2750 × 580 × 750. The sewage tank and the clean water tank cannot be loaded and transported at the same time. The side rear protection is connected by Q235 material welding, and the rear protection cross-section size (mm) is 100 × 40. The height of the rear protection above the ground (mm). 380 The ABS system model/manufacturer is VIE ABS-II/Zhejiang Wan'an Technology Co., Ltd. The optional ABS system model/manufacturer is CM4XL-4S/4M/Guangzhou Ruili Kemi Automotive Electronics Co., Ltd. Only 3365mm wheelbase is available | ||
【Chassis Technical Parameters】 | |||
Chassis Model | HFC1071P33K1C7ZS | Chassis name | Truck chassis |
Trademark name | Jianghuai brand | manufacturing enterprise | Anhui Jianghuai Automobile Group Co., Ltd |
Number of axes | 2 | Number of tires | 6 |
Wheelbase (mm) | 3365,2850 | ||
Tire specifications | 7.00R16LT 14PR | ||
Number of steel plate springs | 5/5+6,11/9+7 | Front wheel base (mm) | 1440,1452 |
Fuel type | diesel oil | Rear wheel base (mm) | 1425,1525 |
Emission standards | GB17691-2018 National VI | ||
Engine model | Engine manufacturing enterprises | Emissions（ml） | Power (Kw) |
D25TCIF1 Q23-115E60 | Kunming Yunnei Power Co., Ltd Anhui Quanchai Power Co., Ltd | 2499 2300 | 110 85 |
Customer case of using our manufactured cleaning and suction truck：
Related News
Submitted successfully
We will contact you as soon as possible
