10 Cubic Clening The Suction Truck-manufacture,factory,supplier from China

This 12 cubic meter sewage suction truck is mainly used to clean urban sewers, sediment in pipelines, and dredge dead corners of mud ditches. It can also be used to clean industrial drainage pipelines, walls, etc. It can also be used for watering, transporting water, and flushing highways. In emergency situations, it can be used for firefighting. Using an external power source saves costs, reduces vehicle wear and tear, and eliminates exhaust emissions during use, which is beneficial for environmental protection.

The main purpose of this vehicle is for cleaning and suction of sewage. The dedicated devices are vacuum pumps and tanks. The total capacity of the sewage tank is 7.45 cubic meters. The effective volume of the sewage tank is 7.10 cubic meters. The medium is liquid sewage with a density of 800 kg/cubic meter.

Clean The Suction And Purification Vehicle Tail switch designAdded switch design at the rear for easy operationConvenient volume can be customized, saving labor costsTank body and component maintenance:1. Regularly apply butter to all positions of the vehicle with grease nipples.2. Regularly check all bolt connection positions and screws of the vehicle, and tighten them if they are loose.3. Regularly clean the dirt in the water tank and overflow valve.4. Before opening the back cover, you need to loosen the locking thread first.5.

The vehicle is equipped with a tank and pump, which are used for suction and discharge of feces. Transport medium: liquid waste; Medium density: 800 kilograms per cubic meter. Effective capacity of the tank: 11.5 cubic meters. Dimensions of the tank body (length x long axis x short axis) (mm): 4400 x 2350 x 1450. Protective material: Q235A, connection method: Welding connection is used for the left and right sides as well as the lower rear protection. The cross-sectional size of the lower rear protection (mm) is 120 × 50.

Cleaning and suction truck is a widely used specialized vehicle, which is widely used for cleaning and suction in places such as sewers, manholes, septic tanks, etc.High pressure pump (usage tips):The high-pressure pump (diesel engine oil) needs to be replaced every 50 hours of operation.(Add CD15W-40 and above)2. During the use of the high-pressure pump, oil will be consumed. Keep the oil level at 2/3 position(observed through the observation port).3. Try to install clean fire water or tap water, and regularly clean the inlet filter of the high-pressure pump.4.

1.Introduction of compressed garbage truckSanitation compressed garbage truck is a kind of efficient collection, transfer of garbage, collection of urban residents household garbage and other compressed garbage sanitation special vehicle, in the process of garbage collection, transfer can avoid the leakage along the way.2.Compressed garbage truck live shooting  [Vehicle technical parameters]Product trademarkXiangNong da cardAnnouncement batch345 (Extended)product nameCompressed garbage truckproduct modelSGW5180ZYSFgross mass (Kg)18000Tank volume (m3)Rated load mass (Kg)7305,7370,7805

This vehicle is used for suction and transportation of feces. The main devices are a tank and a pump. The effective volume of the tank is 2.44 cubic meters, the medium is liquid waste, the density is 800 kg/cubic meter, and the external dimensions of the tank (mm) are long axis X short axis X tank length (1350X1000X2700). The side rear protection is welded and connected with Q235 material, and the cross-sectional size of the rear protection is 50 × 100. The height of the rear protection above the ground is 440 mm.

1.Product features are described as followsa.Carriage detachable garbage truck, also known as hook arm garbage truck. It is a specialized sanitation waste transportation vehicle that uses a retractable hook arm to achieve secondary lifting of garbage bins, which can lift and lower the garbage bins on their own, and can automatically dump garbage. This vehicle is widely used for urban street and school waste disposal, and is used for collecting, transporting, and unloading urban bagged and bulk household waste.

This vehicle is used for the collection and cleaning of feces and sewage. The main equipment is a tank and a pump. Transport medium: liquid sewage, medium density: 800 kg/cubic meter. Effective volume of the tank: 2.45 cubic meters. The tank size is (length x long axis x short axis) (mm): 2600 x 1400 x 900. Only 2800mm wheelbase is installed ABS model and manufacturer: APG3550500A, Zhejiang Asia Pacific Electromechanical Co., Ltd; ABS/ASR-12V-4S/4M, Xiangyang Dongfeng Longcheng Machinery Co., Ltd.

The vehicle is equipped with a tank for the collection and cleaning of feces and sewage. The transport medium is liquid sewage with a density of 800 kg/cubic meter and an effective volume of 4.63 cubic meters. The external dimensions of the tank (length x long axis x short axis) (mm) are 3600 x 1600 x 1100. The vehicle only has a wheelbase of 3360mm ABS model and manufacturer correspondence: CM4XL-4S/4M/Guangzhou Ruili Kemi Automotive Electronics Co., Ltd.

Medium sized garbage trucks have a large effective capacity for garbage bins, up to 8 cubic meters; Adopting side automatic feeding to reduce the round-trip distance of workers, high work efficiency, and equipped with push plates in the garbage bin, which can slightly compress garbage and improve the effective capacity utilization rate of the bin; Using push plate automatic unloading, the operator can complete the unloading operation in the cab, optimizing the working environment for workers; The overall appearance of the vehicle is beautiful, easy to clean and self cl

Choose the appropriate fecal suction truck：Choose according to your own income.

The main advantages of diesel suction trucks include low price, efficient discharge, strong suction, and good durability.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch347 (Extended)Product NameSewage suction truckProduct modelSGW5182GXWFTotal mass (Kg)18000Tank volume (m3)11.6Rated load capacity (Kg)10020,9955External dimensions (mm)7350,7900×2500×3400Curb weight (Kg)7850Cargo size (mm)××Rated passenger capacity (person)Total mass of quasi trailer (Kg)Cab capacity (persons)2,3Maximum load capacity of saddle (Kg)Approach Angle/Departure Ang

Small Fecal Suction Truck The whole vehicle picture is shown below 【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch331Product NameFecal suction truckProduct modelSGW5047GXEFTotal mass (Kg)4495Tank volume (m3)2.06Rated load capacity (Kg)1570External dimensions (mm)5650×1900×2300Curb weight (Kg)2600Cargo size (mm)××Rated passenger capacity (person)Total mass of quasi trailer (Kg)Cab capacity (persons)2+3Maximum load capacity of saddle (Kg)Approach Angle/Departure Angle (degrees)20/14Front/rear suspension (mm)1130/1670Axle load (Kg)1617/28

The advantages of a powerful suction truck mainly include the following aspects:Widely applicable working conditions:The applicable working conditions are more extensive. Equipped with dual rear axles and differential locks, it can provide sufficient grip even on muddy or bumpy roads, helping the vehicle quickly get out of the trap and continue driving.Strong power and handling:Equipped with Yuchai YCS06245-60 engine, it has a displacement of 6.23L and a maximum torque of 850N · m.

How much is the price of a customized fecal suction truck? A current vehicle | Imported fecal suction truckYou can contact us if you need it! Professional manufacturer！Customized fecal suction truck operating system:The self suction and self discharge of dirt in the tank can be completed by operating the handle of the multi way directional valve (four-way valve). When operating the multi way directional valve, a power take-off should be attached to drive the vacuum suction pump.

Every step from material selection to factory production of light fecal suction  trucks is strictly controlled.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch371Product NameFecal suction truckProduct modelSGW5030GXEYT6Total mass (Kg)3495Tank volume (m3)2.17Rated load capacity (Kg)1655External dimensions (mm)4950×1780×1940Curb weight (Kg)1710Cargo size (mm)××Rated passenger capacity (person)Total mass of quasi trailer (Kg)Cab capacity (persons)2Maximum load capacity of saddle (Kg)Approach Angle/Departure Angle (degrees)29/28Front/rear suspen

Performance of cleaning and suction dual-use suction truck: The suction truck has the characteristics of suction, self suction, self discharge, and direct injection. Filling time of manure tank: ≤ 5 minutes, suction distance: ≥ 8m. It has the characteristics of long service life, fast working speed, easy operation, and convenient transportation. The sewage suction truck is mainly used to clean the sediment in urban sewers, pipelines, and clear dead corners of mud ditches. It can also be used to clean industrial drainage pipelines, walls, etc.

Municipal cleaning suction truck vehicle introduction and performance features: Chassis configuration: adopting Dongfeng Tianlong chassis, engineering yellow cab (color optional), Cummins 290 horsepower National VI engine, original double-layer beam, Fast 9-speed gearbox, wheelbase 4350+1350295 vacuum tires, original ABS, with directional assistance, clutch booster, air brake, and air conditioning.Function introduction: The cleaning and suction truck is a special vehicle that combines cleaning and suction functions by adding suction pumps, suction tanks, suction pipelines and other facilities

The Xiangnong environmental sanitation suction truck is suitable for urban and rural areas, as well as residential properties, to suction and transport liquid substances such as feces and mud. The suction, transportation, and discharge of sediment in the sewer system, especially larger objects such as mud, silt, stones, and bricks that can be sucked up. It has the characteristics of high vacuum degree, large tonnage, high efficiency, and wider application.

The capacity of the circular tank suction truck is very large, which can process a large amount of sludge and sewage at once.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandProduct model341Product Namesewage suction truck Tank volume (m3)SGW5120GXWCA6Total mass (Kg)11995External dimensions (mm)7.9Rated load capacity (Kg)6240Cargo size (mm)7030×2290×2930Curb weight (Kg)5560Total mass of quasi trailer (Kg)××Rated passenger capacity (person) Maximum load capacity of saddle (Kg) Cab capacity (persons)3Front/rear suspension (mm) Approach Angle/

This model is based on the chassis of a cargo truck and is modified with components such as pressure tanks, vacuum suction systems, hydraulic systems, spill valves, and hand washing devices. The car has a simple appearance, reliable quality, easy operation, high suction power, and long suction range.The dedicated part of the sewage suction truck consists of a power take-off, a transmission shaft, a sewage suction pump, a pressure tank, a hydraulic system, a pipeline system, a vacuum pressure gauge, an overflow valve, and a hand washing device.

This efficient cleaning and suction truck is mainly used for sewage discharge and dredging, with the main devices being the tank body and pump.   【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandProduct model357 (Extended) Product NameClean the suction truckTank volume (m3)SGW5180GQWCA6Total mass (Kg)18000External dimensions (mm)9.47Rated load capacity (Kg)7580,7645Cargo size (mm)9150,9020,8820×2550×3350,3450Curb weight (Kg)10225Total mass of quasi trailer (Kg)××Rated passenger capacity (person) Maximum load capacity of saddle (Kg

Heavy duty suction truck hydraulic opening rear cover, high degree of automation, can effectively reduce the labor intensity and danger of operators.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandProduct model343 (Extended)Product Namesewage suction truck Tank volume (m3)SGW5250GXWFTotal mass (Kg)25000External dimensions (mm)16Rated load capacity (Kg)12275Cargo size (mm)10300×2500×3700Curb weight (Kg)12530Total mass of quasi trailer (Kg)××Rated passenger capacity (person) Maximum load capacity of saddle (Kg) Cab capacity (persons)3Front/rear s