2-manufacture,factory,supplier from China

The safety hazards in the operation of hook arm garbage trucks mainly include the following aspects:1. Overloading operation: When the hook arm garbage truck is packing, if the weight of the garbage in the garbage compartment exceeds the allowable range of the vehicle, it may cause damage to the hydraulic components, resulting in oil leakage and clutch pulley slippage in mild cases, and clutch burnout in severe cases.2.

1、Product use: compressed garbage truck is mainly used for municipal sanitation and community living garbage, towns and villages sanitation barrels of living garbage collection and transportation! It is characterized by a car can be equipped with dozens of garbage cans!2、Product name: Foton Pilot ES5_Compressed Garbage Truck3、Chassis Model: BJ11244、Configuration：New national six, 3800 wheelbase, 170 hp Yunnei, 8-speed transmission, 825 steel wire tires, original air conditioning, electric doors and windows, multi-function steering wheel.

The precautions for compressing garbage trucks during the compression process mainly include the following points:1. Prohibited from disposing of construction waste: Compressed garbage trucks and compactor garbage truck are strictly prohibited from disposing of construction waste to avoid damaging machinery.2. Handling of abnormal operation of hydraulic system: If any abnormal movement is found during the operation of the hydraulic system, the work should be stopped immediately, the cause should be analyzed and the fault should be eliminated.

1. Preparation before homework(1) The rear of the sewage suction truck should be as close as possible to the work site and parked. (2) Turn the straight through plug of the oil return tank to an angle of about 45 ° with the axis of the oil inlet pipe, and observe the flow of lubricating oil in the oil inlet pipe. (3) Open the side door of the platform box, take out the suction hose, and swing it backwards without any bending phenomenon. 2.

(1) Compliant with industry standards, with a high degree of standardization and good universality.(2) The hook arm garbage truck adopts electric hydraulic joint control technology, which simplifies the circuit and realizes safety interlock function, ensuring that the motion interlock can be achieved during electronic control and manual control, which is safe and reliable, and reduces the failure rate.(3) The control buttons adopt a user-friendly design, with smooth and flexible operation.(4) The box lock of the Roll-off truck adopts hydraulic locking method, which is easy to operate

The reason for the lack of pressure in the hydraulic system(1) The oil level in the hydraulic oil tank is too low;(2) Hydraulic oil filter clogged;(3) Damage such as gear pump leakage and pump shaft fracture;(4) Internal leakage of three-way shuttle valve and stuck valve core;(5) The main overflow valve and directional valve core are stuck or worn, the directional valve coil is burnt out, and the power supply is abnormal;(6) Internal leakage of the back pressure valve of the sweeping disc and suction nozzle;(7) Oil leakage and pressure relief inside the hydraulic manifold block.processing meth

1、 Why can't the high-pressure pump generate pressure?1. Check if the pipeline between the water outlet and the high-pressure pump is blocked, causing insufficient water supply.2. Check for garbage in the filter and clean the filter.3. Observe whether the pump body and high-pressure pipe are shaking. If there is shaking, it indicates that there is air in the pipeline. It is necessary to open the high-pressure three-way valve of the high-pressure pump without installing a nozzle, and then add the throttle to discharge the air in the pipeline until the high-pressure pipe flows normally.4.

matters needing attention:1. The swing arm garbage truck must fully press the clutch pedal when opening or closing the power take-off. It is strictly prohibited to directly engage the power take-off, as it may cause damage to the gearbox gears.2. During prolonged operation of the swing arm garbage truck, please turn off the power take-off. When driving normally, the high speed of the power take-off can easily cause the hydraulic pump to burn out. 3. Regularly replace the hydraulic oil of the swing arm garbage truck.

Precautions for sprinkler truck:1. Personnel are not allowed to get on or off equipment while driving, and no one is allowed to stand outside the cab for maintenance or other work.2. No other unrelated personnel are allowed to ride the water truck.3. Do not drive on ground with a transverse slope exceeding 10 ° and a longitudinal slope exceeding 30 °, and do not ride higher than the chassisStones and other materials are not allowed to turn off the engine or slide in neutral.4. When using a high-pressure water cannon, it is not allowed to spray on people or live equipment.5.

 Shandong Xiangnong Special Vehicle Co., Ltd. organized enterprise personnel to attend the 20th China (Liangshan) Special Vehicle ExhibitionSince its establishment, the China Liangshan Special Purpose Vehicle Exhibition has been an important platform for communication in the domestic and international special purpose vehicle industry. It not only showcases the achievements of China's specialized automobile industry, but also provides a compass for the development trend of the global specialized automobile industry.