Preparation before homework:The rear of the Septic Tank Cleaning Truck should be as close as possible to the work site and parked.Turn the straight through plug of the oil return tank to an angle of about 45 ° with the axis of the oil inlet pipe, and observe the flow of lubricating oil in the oil inlet pipe.Open the side door of the platform box, take out the suction hose, and swing it backwards without any bending phenomenon.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch331 (Extended)Product NameFecal suction truckProduct modelS
Contact Now
Septic tank vacuum truck:It is an essential sanitation vehicle for urban environmental treatment. When driving a suction truck in winter, fogging of the cab glass is a common problem. If the fog is not treated, it is particularly dangerous to drive. 【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch345 (Extended)Product NameFecal suction truckProduct modelSGW5163GXEFTotal mass (Kg)16000Tank volume (m3)11.5Rated load capacity (Kg)9105,9170External dimensions (mm)7400×2500×3100Curb weight (Kg)6700Cargo size (mm)××Rated pas
Contact Now
Septic Cleaning Truck is widely applicable in the following scenarios:Poultry manureCatering wastewaterToiletSewage from sewers【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch347 (Extended)Product NameFecal suction truckProduct modelSGW5048GXEFTotal mass (Kg)4495Tank volume (m3)2.85Rated load capacity (Kg)2195External dimensions (mm)5050×1850×2150Curb weight (Kg)2170Cargo size (mm)××Rated passenger capacity (person) Total mass of quasi trailer (Kg) Cab capacity (persons)2Maximum load capacity of saddle (Kg) Approach Angle/Departure
Contact Now
The vehicle is equipped with a tank for the collection and cleaning of feces and sewage. The transport medium is liquid sewage with a density of 800 kg/cubic meter and an effective volume of 4.63 cubic meters. The external dimensions of the tank (length x long axis x short axis) (mm) are 3600 x 1600 x 1100. The vehicle only has a wheelbase of 3360mm ABS model and manufacturer correspondence: CM4XL-4S/4M/Guangzhou Ruili Kemi Automotive Electronics Co., Ltd.
Contact Now
If there is water accumulation or garbage in the water quality separator of the vacuum suction truck, it is an operational error and must be cleaned thoroughly, otherwise it will affect the service life of the vacuum pump, and in severe cases, it will immediately damage the vacuum pump. 【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch347 (Extended)Product NameFecal suction truckProduct modelSGW5071GXEFTotal mass (Kg)7360Tank volume (m3)4.6Rated load capacity (Kg)3530External dimensions (mm)5995×2000×
Contact Now
The application areas of Septic suction truck involve domestic sewage treatment, industrial sewage treatment, livestock waste treatment, and so on. 【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch357 Product NameFecal suction truckProduct modelSGW5070GXECA6 yellow card//SGW5042GQCA6 blue card Total mass (Kg)7360Tank volume (m3)4.5Rated load capacity (Kg)3465External dimensions (mm)5995×2100×2450Curb weight (Kg)3700Cargo size (mm)××Rated passenger capacity (person)Total mass of quasi trailer (Kg)Cab capacity (
Contact Now
Double row cab (with 3+3 people in the cab), the vehicle has an exposed tank structure. The front of the box is an equipment box, the middle is a water tank, and the rear is a pump room. The carrier tank body is made of high-quality carbon steel material (304 stainless steel material can also be optionally installed), and the entire box body is equipped with Chengli high-end electrophoresis technology.
Contact Now
The capacity of the circular tank suction truck is very large, which can process a large amount of sludge and sewage at once.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandProduct model341Product Namesewage suction truck Tank volume (m3)SGW5120GXWCA6Total mass (Kg)11995External dimensions (mm)7.9Rated load capacity (Kg)6240Cargo size (mm)7030×2290×2930Curb weight (Kg)5560Total mass of quasi trailer (Kg)××Rated passenger capacity (person) Maximum load capacity of saddle (Kg) Cab capacity (persons)3Front/rear suspension (mm) Approach Angle/
Contact Now
This vehicle is used for suction and transportation of feces. The main devices are a tank and a pump. The effective volume of the tank is 2.44 cubic meters, the medium is liquid waste, the density is 800 kg/cubic meter, and the external dimensions of the tank (mm) are long axis X short axis X tank length (1350X1000X2700). The side rear protection is welded and connected with Q235 material, and the cross-sectional size of the rear protection is 50 × 100. The height of the rear protection above the ground is 440 mm.
Contact Now
This vehicle is used for the collection and cleaning of feces and sewage. The main equipment is a tank and a pump. Transport medium: liquid sewage, medium density: 800 kg/cubic meter. Effective volume of the tank: 2.45 cubic meters. The tank size is (length x long axis x short axis) (mm): 2600 x 1400 x 900. Only 2800mm wheelbase is installed ABS model and manufacturer: APG3550500A, Zhejiang Asia Pacific Electromechanical Co., Ltd; ABS/ASR-12V-4S/4M, Xiangyang Dongfeng Longcheng Machinery Co., Ltd.
Contact Now
Septic Vacuum Truck.They are suitable for suctioning feces, sewage, sludge and liquidsmixed with small suspended debris, and are suitable for municipal sanitation, large, medium and small industrial and mining enterprises, residential areas, schools and other place.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch346 (Extended)Product NameFecal suction truckProduct modelSGW5120GXEFTotal mass (Kg)11995Tank volume (m3)8.7Rated load capacity (Kg)6700External dimensions (mm)6800×2200×2700Curb weight (Kg)5100Cargo size (mm)××Rated passenger capacity (p
Contact Now
The composition of a fecal suction truck includes an oil-water separator, a water vapor separator, a dedicated vacuum fecal suction pump, a volumetric pressure gauge, a pipeline system, a suction duct, a self flow valve, a vacuum tank body, a connector (fecal window), and a fully automatic spill proof valve.Kind reminder: The entire vehicle can be sprayed in different colors The detailed parameters of the entire vehicle are as follows ↓【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandProduct model347Product NameFecal suction truck
Contact Now
The suction truck is mainly used as a specialized vehicle for cleaning and cleaning in environments such as septic tanks, sewage ditches, and sewers. Along with sprinkler trucks and garbage trucks, it is also known as one of the three major sanitation vehicles. There are air holes and suction and discharge holes at the top of the tank. The air hole is connected to the water vapor separator as a channel for air to enter and exit the tank. The inlet hole is usually sealed and can be opened during maintenance.
Contact Now
Can Process Customized Cleaning And Suction TrucksManufacturer's stock, model and size can be selectedCustomize products according to your needs(For detailed consultation with customer service)1. Environmental friendliness: Cleaning the suction truck can effectively avoid secondary pollution and is suitable for cleaning various liquid and semi liquid media, such as septic tanks, sewers, rainwater wells, inspection wells, sediment wells, etc. Its design avoids the pollution problems of traditional cleaning methods and improves the level of environmental hygiene.2.
Contact Now
Large scale kitchen waste truck.The operation method is to slowly transport the bucket of "swill" through the conveyor belt of the vehicle, and pour it into the carriage at the top of the vehicle (the carriage can be divided into a carriage body and a tank body). The garbage is pushed by a strong push plate and then separated into solid and liquid. The separated liquid enters the sewage tank at the bottom of the tank body, and the solid garbage is compressed and stored in the tank body, reducing its volume.
Contact Now
The working principle of the sewage suction truck:Due to the continuous immersion of the fecal suction hose on the liquid surface, the air inside the fecal tank becomes thinner and thinner as it cannot be replenished. As a result, the pressure inside the tank is lower than atmospheric pressure, and the fecal liquid enters the tank through the fecal suction hose under atmospheric pressure.
Contact Now
Cleaning and suction truck is a widely used specialized vehicle, which is widely used for cleaning and suction in places such as sewers, manholes, septic tanks, etc.High pressure pump (usage tips):The high-pressure pump (diesel engine oil) needs to be replaced every 50 hours of operation.(Add CD15W-40 and above)2. During the use of the high-pressure pump, oil will be consumed. Keep the oil level at 2/3 position(observed through the observation port).3. Try to install clean fire water or tap water, and regularly clean the inlet filter of the high-pressure pump.4.
Contact Now
Sale Of Fecal Suction Trucks Model selection1. Pay attention to issues such as board quality2. Selection of Vacuum Kit3. Selection of Rear Self Flow ValveCleaning and suction trucks can also be used for emergency response to sudden environmental pollution accidents, as well as for suction work in septic tanks and sewers in residential areas, engineering projects, schools, breeding farms, and other places.
Contact Now
The modified part of this product mainly consists of the tank body, hydraulic opening tank door, suction pipe system, hydraulic system, and operating system.1、The sewage tank is equipped with a liquid level indicator, which is made of 6mm high-quality steel plate rolled and welded.The end is welded with a 6mm thick high-quality steel plate elliptical head. To improve the strength and rigidity of the tank,there are reinforcement plates.
Contact Now
1.The product function is introduced as follows(1)The suction vehicle is a new sanitation vehicle to collect, transfer and transport sludge and sewage and avoid secondary pollution. The back cover can be opened and the tank body to lift and unload easily, working fast and large capacity.
Contact Now
A small road sweeper is a widely used road sweeper, which adopts a working structure of a central 4-disc brush and a rear suction cup. The garbage bin and water tank are designed separately, with a front water tank, a central auxiliary engine and fan, and a rear garbage bin. The road sweeper is equipped with four sweeping brushes, with a rear suction nozzle. The left and right front sweeping brushes sweep the garbage in the corners from the outside to the inside, focusing on the area that can be swept by the rear sweeping brush.
Contact Now
Pipeline Success Truck adopts a thickened tank body, which extends its service life to a certain extent.
Contact Now
The vehicle is equipped with a tank and pump, which are used for suction and discharge of feces. Transport medium: liquid waste; Medium density: 800 kilograms per cubic meter. Effective capacity of the tank: 11.5 cubic meters. Dimensions of the tank body (length x long axis x short axis) (mm): 4400 x 2350 x 1450. Protective material: Q235A, connection method: Welding connection is used for the left and right sides as well as the lower rear protection. The cross-sectional size of the lower rear protection (mm) is 120 × 50.
Contact Now
Ride on road sweepers can generally choose whether to have water spray and dustreduction function according to work needs. Conventional configurations usually come with rear water spray, and attention should be paid to whether the water volumein the clean water tank is sufficient.
Contact Now
