Preparation before homework:The rear of the Septic Tank Cleaning Truck should be as close as possible to the work site and parked.Turn the straight through plug of the oil return tank to an angle of about 45 ° with the axis of the oil inlet pipe, and observe the flow of lubricating oil in the oil inlet pipe.Open the side door of the platform box, take out the suction hose, and swing it backwards without any bending phenomenon.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch331 (Extended)Product NameFecal suction truckProduct modelS
Contact Now
Septic tank vacuum truck:It is an essential sanitation vehicle for urban environmental treatment. When driving a suction truck in winter, fogging of the cab glass is a common problem. If the fog is not treated, it is particularly dangerous to drive. 【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch345 (Extended)Product NameFecal suction truckProduct modelSGW5163GXEFTotal mass (Kg)16000Tank volume (m3)11.5Rated load capacity (Kg)9105,9170External dimensions (mm)7400×2500×3100Curb weight (Kg)6700Cargo size (mm)××Rated pas
Contact Now
1.Product features are described as follows(1)Sprinkler trucks, also known as green spray trucks, multifunctional dust suppression vehicles, and water transport vehicles. This vehicle is suitable for various road flushing, watering trees, green belts, lawn greening, road flushing, dust reduction in construction of factories and mining enterprises, and high-altitude building flushing.
Contact Now
Septic Cleaning Truck is widely applicable in the following scenarios:Poultry manureCatering wastewaterToiletSewage from sewers【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch347 (Extended)Product NameFecal suction truckProduct modelSGW5048GXEFTotal mass (Kg)4495Tank volume (m3)2.85Rated load capacity (Kg)2195External dimensions (mm)5050×1850×2150Curb weight (Kg)2170Cargo size (mm)××Rated passenger capacity (person) Total mass of quasi trailer (Kg) Cab capacity (persons)2Maximum load capacity of saddle (Kg) Approach Angle/Departure
Contact Now
The vehicle is equipped with a tank for the collection and cleaning of feces and sewage. The transport medium is liquid sewage with a density of 800 kg/cubic meter and an effective volume of 4.63 cubic meters. The external dimensions of the tank (length x long axis x short axis) (mm) are 3600 x 1600 x 1100. The vehicle only has a wheelbase of 3360mm ABS model and manufacturer correspondence: CM4XL-4S/4M/Guangzhou Ruili Kemi Automotive Electronics Co., Ltd.
Contact Now
The application areas of Septic suction truck involve domestic sewage treatment, industrial sewage treatment, livestock waste treatment, and so on. 【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch357 Product NameFecal suction truckProduct modelSGW5070GXECA6 yellow card//SGW5042GQCA6 blue card Total mass (Kg)7360Tank volume (m3)4.5Rated load capacity (Kg)3465External dimensions (mm)5995×2100×2450Curb weight (Kg)3700Cargo size (mm)××Rated passenger capacity (person)Total mass of quasi trailer (Kg)Cab capacity (
Contact Now
Before opening the feeding port cover of the Construction Site Specific Sprinkler Truck, the pressure relief valve should be opened first to discharge the residual gas in the tank, in order to avoid injury accidents.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brand Announcement batch347 (Extended)Product Namewatering lorry Product modelSGW5070GPSFTotal mass (Kg)7360Tank volume (m3)4.12Rated load capacity (Kg)3930External dimensions (mm)5995,6400×2100×2650Curb weight (Kg)3300Cargo size (mm)××Rated passenger capacity (person)Total mass of quasi trailer
Contact Now
If there is water accumulation or garbage in the water quality separator of the vacuum suction truck, it is an operational error and must be cleaned thoroughly, otherwise it will affect the service life of the vacuum pump, and in severe cases, it will immediately damage the vacuum pump. 【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch347 (Extended)Product NameFecal suction truckProduct modelSGW5071GXEFTotal mass (Kg)7360Tank volume (m3)4.6Rated load capacity (Kg)3530External dimensions (mm)5995×2000×
Contact Now
Installation configuration: rectangular sprinkler tank, power take-off, sprinkler pump, ball valve, fire hydrant interface, filter screen, pipeline, ball valve switch, front flushing, rear spraying, side spraying, anti-aircraft gun, high-level showerhead and other accessories are all standard products. 【Vehicle technical parameters】Product trademarkXiangnongda brand.Announcement Batch363Product namewatering lorry Product model.SGW5180GPSBJ6Total mass (kg)18000Volume of the tank (m3) 15Rated loading mass (kg)11070,11005Overall dimensions (mm).7780×2500×3200Curb we
Contact Now
Double row cab (with 3+3 people in the cab), the vehicle has an exposed tank structure. The front of the box is an equipment box, the middle is a water tank, and the rear is a pump room. The carrier tank body is made of high-quality carbon steel material (304 stainless steel material can also be optionally installed), and the entire box body is equipped with Chengli high-end electrophoresis technology.
Contact Now
The capacity of the circular tank suction truck is very large, which can process a large amount of sludge and sewage at once.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandProduct model341Product Namesewage suction truck Tank volume (m3)SGW5120GXWCA6Total mass (Kg)11995External dimensions (mm)7.9Rated load capacity (Kg)6240Cargo size (mm)7030×2290×2930Curb weight (Kg)5560Total mass of quasi trailer (Kg)××Rated passenger capacity (person) Maximum load capacity of saddle (Kg) Cab capacity (persons)3Front/rear suspension (mm) Approach Angle/
Contact Now
Optional configurations for large sprinkler trucks: GPS, universal nozzle, solenoid valve, pneumatic valve, visual operating system, external power, etc.【Technical parameters of the entire vehicle】Product trademarkwatering lorry Announcement batchEQ5250GPSL2Product Name25000Product model19Total mass (Kg)14505Tank volume (m3)10260,10660,10060,10460×2480×3200,3880Rated load capacity (Kg)10300External dimensions (mm)××Curb weight (Kg)Cargo size (mm)Rated passenger capacity (person)3Total mass of quasi trailer (Kg)Cab capacity (persons)24/11Maximum load capacity of saddle (Kg)1450/3160,1250/3
Contact Now
This vehicle is used for suction and transportation of feces. The main devices are a tank and a pump. The effective volume of the tank is 2.44 cubic meters, the medium is liquid waste, the density is 800 kg/cubic meter, and the external dimensions of the tank (mm) are long axis X short axis X tank length (1350X1000X2700). The side rear protection is welded and connected with Q235 material, and the cross-sectional size of the rear protection is 50 × 100. The height of the rear protection above the ground is 440 mm.
Contact Now
This vehicle is used for the collection and cleaning of feces and sewage. The main equipment is a tank and a pump. Transport medium: liquid sewage, medium density: 800 kg/cubic meter. Effective volume of the tank: 2.45 cubic meters. The tank size is (length x long axis x short axis) (mm): 2600 x 1400 x 900. Only 2800mm wheelbase is installed ABS model and manufacturer: APG3550500A, Zhejiang Asia Pacific Electromechanical Co., Ltd; ABS/ASR-12V-4S/4M, Xiangyang Dongfeng Longcheng Machinery Co., Ltd.
Contact Now
Septic Vacuum Truck.They are suitable for suctioning feces, sewage, sludge and liquidsmixed with small suspended debris, and are suitable for municipal sanitation, large, medium and small industrial and mining enterprises, residential areas, schools and other place.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch346 (Extended)Product NameFecal suction truckProduct modelSGW5120GXEFTotal mass (Kg)11995Tank volume (m3)8.7Rated load capacity (Kg)6700External dimensions (mm)6800×2200×2700Curb weight (Kg)5100Cargo size (mm)××Rated passenger capacity (p
Contact Now
Small sprinkler trucks are used in urban roads, large factory areas, military units, gardens and other units to clean road surfaces, maintain hygiene, prevent dust, water, spray pesticides, etc., in order to achieve the effect of beautifying the environment.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch374Product Namewatering lorry Product modelSGW5030GPSYT6Total mass (Kg)3495Tank volume (m3)2Rated load capacity (Kg)1815External dimensions (mm)5300×1750×2080Curb weight (Kg)1550Cargo size (mm)××Rated passenger capacity (person)Tot
Contact Now
Spot supply of sprinkler trucks, with customer satisfaction as the principle, providing customers with 24-hour and comprehensive after-sales service.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brand Announcement batch323Product Namewatering lorry Product modelSGW5032GPSFTotal mass (Kg)3495Tank volume (m3)1.88Rated load capacity (Kg)1795External dimensions (mm)5450×1750×2300Curb weight (Kg)1570Cargo size (mm)××Rated passenger capacity (person)Total mass of quasi trailer (Kg)Cab capacity (persons)2Maximum load capacity of saddle (Kg)Approach Angle/Departure
Contact Now
The composition of a fecal suction truck includes an oil-water separator, a water vapor separator, a dedicated vacuum fecal suction pump, a volumetric pressure gauge, a pipeline system, a suction duct, a self flow valve, a vacuum tank body, a connector (fecal window), and a fully automatic spill proof valve.Kind reminder: The entire vehicle can be sprayed in different colors The detailed parameters of the entire vehicle are as follows ↓【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandProduct model347Product NameFecal suction truck
Contact Now
The suction truck is mainly used as a specialized vehicle for cleaning and cleaning in environments such as septic tanks, sewage ditches, and sewers. Along with sprinkler trucks and garbage trucks, it is also known as one of the three major sanitation vehicles. There are air holes and suction and discharge holes at the top of the tank. The air hole is connected to the water vapor separator as a channel for air to enter and exit the tank. The inlet hole is usually sealed and can be opened during maintenance.
Contact Now
Can Process Customized Cleaning And Suction TrucksManufacturer's stock, model and size can be selectedCustomize products according to your needs(For detailed consultation with customer service)1. Environmental friendliness: Cleaning the suction truck can effectively avoid secondary pollution and is suitable for cleaning various liquid and semi liquid media, such as septic tanks, sewers, rainwater wells, inspection wells, sediment wells, etc. Its design avoids the pollution problems of traditional cleaning methods and improves the level of environmental hygiene.2.
Contact Now
Large scale kitchen waste truck.The operation method is to slowly transport the bucket of "swill" through the conveyor belt of the vehicle, and pour it into the carriage at the top of the vehicle (the carriage can be divided into a carriage body and a tank body). The garbage is pushed by a strong push plate and then separated into solid and liquid. The separated liquid enters the sewage tank at the bottom of the tank body, and the solid garbage is compressed and stored in the tank body, reducing its volume.
Contact Now
The working principle of the sewage suction truck:Due to the continuous immersion of the fecal suction hose on the liquid surface, the air inside the fecal tank becomes thinner and thinner as it cannot be replenished. As a result, the pressure inside the tank is lower than atmospheric pressure, and the fecal liquid enters the tank through the fecal suction hose under atmospheric pressure.
Contact Now
Sale Of Fecal Suction Trucks Model selection1. Pay attention to issues such as board quality2. Selection of Vacuum Kit3. Selection of Rear Self Flow ValveCleaning and suction trucks can also be used for emergency response to sudden environmental pollution accidents, as well as for suction work in septic tanks and sewers in residential areas, engineering projects, schools, breeding farms, and other places.
Contact Now
Cleaning and suction truck is a widely used specialized vehicle, which is widely used for cleaning and suction in places such as sewers, manholes, septic tanks, etc.High pressure pump (usage tips):The high-pressure pump (diesel engine oil) needs to be replaced every 50 hours of operation.(Add CD15W-40 and above)2. During the use of the high-pressure pump, oil will be consumed. Keep the oil level at 2/3 position(observed through the observation port).3. Try to install clean fire water or tap water, and regularly clean the inlet filter of the high-pressure pump.4.
Contact Now