Septic tank suction truck-manufacture,factory,supplier from China

(Total 24 Products for Septic tank suction truck)
Preparation before homework:The rear of the Septic Tank Cleaning Truck should be as close as possible to the work site and parked.Turn the straight through plug of the oil return tank to an angle of about 45 ° with the axis of the oil inlet pipe, and observe the flow of lubricating oil in the oil inlet pipe.Open the side door of the platform box, take out the suction hose, and swing it backwards without any bending phenomenon.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch331 (Extended)Product NameFecal suction truckProduct modelS
  Contact Now
Septic tank vacuum truck:It is an essential sanitation vehicle for urban environmental treatment. When driving a suction truck in winter, fogging of the cab glass is a common problem. If the fog is not treated, it is particularly dangerous to drive.    【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch345 (Extended)Product NameFecal suction truckProduct modelSGW5163GXEFTotal mass (Kg)16000Tank volume (m3)11.5Rated load capacity (Kg)9105,9170External dimensions (mm)7400×2500×3100Curb weight (Kg)6700Cargo size (mm)××Rated pas
  Contact Now
Septic Cleaning Truck is widely applicable in the following scenarios:Poultry manureCatering wastewaterToiletSewage from sewers【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch347 (Extended)Product NameFecal suction truckProduct modelSGW5048GXEFTotal mass (Kg)4495Tank volume (m3)2.85Rated load capacity (Kg)2195External dimensions (mm)5050×1850×2150Curb weight (Kg)2170Cargo size (mm)××Rated passenger capacity (person) Total mass of quasi trailer (Kg) Cab capacity (persons)2Maximum load capacity of saddle (Kg) Approach Angle/Departure
  Contact Now
The application areas of Septic suction truck involve domestic sewage treatment, industrial sewage treatment, livestock waste treatment, and so on.    【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch357 Product NameFecal suction truckProduct modelSGW5070GXECA6 yellow card//SGW5042GQCA6 blue card Total mass (Kg)7360Tank volume (m3)4.5Rated load capacity (Kg)3465External dimensions (mm)5995×2100×2450Curb weight (Kg)3700Cargo size (mm)××Rated passenger capacity (person)Total mass of quasi trailer (Kg)Cab capacity (
  Contact Now
If there is water accumulation or garbage in the water quality separator of the vacuum suction truck, it is an operational error and must be cleaned thoroughly, otherwise it will affect the service life of the vacuum pump, and in severe cases, it will immediately damage the vacuum pump.        【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch347 (Extended)Product NameFecal suction truckProduct modelSGW5071GXEFTotal mass (Kg)7360Tank volume (m3)4.6Rated load capacity (Kg)3530External dimensions (mm)5995×2000×
  Contact Now
The capacity of the circular tank suction truck is very large, which can process a large amount of sludge and sewage at once.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandProduct model341Product Namesewage suction truck Tank volume (m3)SGW5120GXWCA6Total mass (Kg)11995External dimensions (mm)7.9Rated load capacity (Kg)6240Cargo size (mm)7030×2290×2930Curb weight (Kg)5560Total mass of quasi trailer (Kg)××Rated passenger capacity (person) Maximum load capacity of saddle (Kg) Cab capacity (persons)3Front/rear suspension (mm) Approach Angle/
  Contact Now
The vehicle is equipped with a tank for the collection and cleaning of feces and sewage. The transport medium is liquid sewage with a density of 800 kg/cubic meter and an effective volume of 4.63 cubic meters. The external dimensions of the tank (length x long axis x short axis) (mm) are 3600 x 1600 x 1100. The vehicle only has a wheelbase of 3360mm ABS model and manufacturer correspondence: CM4XL-4S/4M/Guangzhou Ruili Kemi Automotive Electronics Co., Ltd.
  Contact Now
This vehicle is used for suction and transportation of feces. The main devices are a tank and a pump. The effective volume of the tank is 2.44 cubic meters, the medium is liquid waste, the density is 800 kg/cubic meter, and the external dimensions of the tank (mm) are long axis X short axis X tank length (1350X1000X2700). The side rear protection is welded and connected with Q235 material, and the cross-sectional size of the rear protection is 50 × 100. The height of the rear protection above the ground is 440 mm.
  Contact Now
Double row cab (with 3+3 people in the cab), the vehicle has an exposed tank structure. The front of the box is an equipment box, the middle is a water tank, and the rear is a pump room. The carrier tank body is made of high-quality carbon steel material (304 stainless steel material can also be optionally installed), and the entire box body is equipped with Chengli high-end electrophoresis technology.
  Contact Now
The suction truck is mainly used as a specialized vehicle for cleaning and cleaning in environments such as septic tanks, sewage ditches, and sewers. Along with sprinkler trucks and garbage trucks, it is also known as one of the three major sanitation vehicles. There are air holes and suction and discharge holes at the top of the tank. The air hole is connected to the water vapor separator as a channel for air to enter and exit the tank. The inlet hole is usually sealed and can be opened during maintenance.
  Contact Now
The composition of a fecal suction truck includes an oil-water separator, a water vapor separator, a dedicated vacuum fecal suction pump, a volumetric pressure gauge, a pipeline system, a suction duct, a self flow valve, a vacuum tank body, a connector (fecal window), and a fully automatic spill proof valve.Kind reminder: The entire vehicle can be sprayed in different colors The detailed parameters of the entire vehicle are as follows ↓【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandProduct model347Product NameFecal suction truck
  Contact Now
The working principle of the sewage suction truck:Due to the continuous immersion of the fecal suction hose on the liquid surface, the air inside the fecal tank becomes thinner and thinner as it cannot be replenished. As a result, the pressure inside the tank is lower than atmospheric pressure, and the fecal liquid enters the tank through the fecal suction hose under atmospheric pressure.
  Contact Now
This vehicle is used for the collection and cleaning of feces and sewage. The main equipment is a tank and a pump. Transport medium: liquid sewage, medium density: 800 kg/cubic meter. Effective volume of the tank: 2.45 cubic meters. The tank size is (length x long axis x short axis) (mm): 2600 x 1400 x 900. Only 2800mm wheelbase is installed ABS model and manufacturer: APG3550500A, Zhejiang Asia Pacific Electromechanical Co., Ltd; ABS/ASR-12V-4S/4M, Xiangyang Dongfeng Longcheng Machinery Co., Ltd.
  Contact Now
Septic Vacuum Truck.They are suitable for suctioning feces, sewage, sludge and liquidsmixed with small suspended debris, and are suitable for municipal sanitation, large, medium and small industrial and mining enterprises, residential areas, schools and other place.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch346 (Extended)Product NameFecal suction truckProduct modelSGW5120GXEFTotal mass (Kg)11995Tank volume (m3)8.7Rated load capacity (Kg)6700External dimensions (mm)6800×2200×2700Curb weight (Kg)5100Cargo size (mm)××Rated passenger capacity (p
  Contact Now
Can Process Customized Cleaning And Suction TrucksManufacturer's stock, model and size can be selectedCustomize products according to your needs(For detailed consultation with customer service)1. Environmental friendliness: Cleaning the suction truck can effectively avoid secondary pollution and is suitable for cleaning various liquid and semi liquid media, such as septic tanks, sewers, rainwater wells, inspection wells, sediment wells, etc. Its design avoids the pollution problems of traditional cleaning methods and improves the level of environmental hygiene.2.
  Contact Now
Cleaning and suction truck is a widely used specialized vehicle, which is widely used for cleaning and suction in places such as sewers, manholes, septic tanks, etc.High pressure pump (usage tips):The high-pressure pump (diesel engine oil) needs to be replaced every 50 hours of operation.(Add CD15W-40 and above)2. During the use of the high-pressure pump, oil will be consumed. Keep the oil level at 2/3 position(observed through the observation port).3. Try to install clean fire water or tap water, and regularly clean the inlet filter of the high-pressure pump.4.
  Contact Now
Pipeline Success Truck adopts a thickened tank body, which extends its service life to a certain extent.
  Contact Now
1.The product function is introduced as follows(1)The suction vehicle is a new sanitation vehicle to collect, transfer and transport sludge and sewage and avoid secondary pollution. The back cover can be opened and the tank body to lift and unload easily, working fast and large capacity.
  Contact Now
The Heavy Duty Cleaning and Success Truck is used for suctioning feces, sewage, sludge, and liquids mixed with small suspended solids. High suction efficiency, self suction and self discharge.The tank body of the cleaning and suction truck is made of high-quality sheet metal from Wuhan Iron and Steel Group, with a 8mm boiler steel plate for the head. It is cylindrical in shape, and the surface of the tank body is shot blasted and treated with rust prevention. The paint adopts a 360 degree baking process without any dead corners.
  Contact Now
How much is the price of a customized fecal suction truck? A current vehicle | Imported fecal suction truckYou can contact us if you need it! Professional manufacturer!Customized fecal suction truck operating system:The self suction and self discharge of dirt in the tank can be completed by operating the handle of the multi way directional valve (four-way valve). When operating the multi way directional valve, a power take-off should be attached to drive the vacuum suction pump.
  Contact Now
Driver's cabin: (new interior, driver's airbag shock-absorbing seat, power windows, automatic climate control, 10.1-inch multimedia screen, central locking (2 keys), Zhiya version Tianxingjian, integrated rearview mirror, LED headlights, illuminated emblem, curtains, multifunctional steering wheel (with cruise control and multimedia control), reverse image, 7-inch color LCD screen combination instrument panel, sunshade); Manual flippingHigh power cleaning and suction truck is assembled on the basis of a Class II original chassis, with the upper part being a tank body and equipped with
  Contact Now
Performance of cleaning and suction dual-use suction truck: The suction truck has the characteristics of suction, self suction, self discharge, and direct injection. Filling time of manure tank: ≤ 5 minutes, suction distance: ≥ 8m. It has the characteristics of long service life, fast working speed, easy operation, and convenient transportation. The sewage suction truck is mainly used to clean the sediment in urban sewers, pipelines, and clear dead corners of mud ditches. It can also be used to clean industrial drainage pipelines, walls, etc.
  Contact Now
Precautions for choosing a gasoline suction truck:1. Pay attention to the quality of the board, vacuum sealing, and poor materials can easily cause deformation of the tank body.2. Selection of vacuum kit, pressure bearing capacity, and perception of temperature difference. The first domestic kit to promote the Weilong series products.3. The selection of the rear can cover should be based on the local working environment, temperature difference, and other factors.4.
  Contact Now
Multi functional suction truck description:Vacuum suction truck configuration: The dedicated part includes the suction truck power take-off, suction truck transmission shaft, suction truck vacuum suction pump, suction truck water gas separator, suction truck oil gas separator, suction truck multi way directional valve, suction truck suspension rod, suction truck tank body, suction truck discharge valve, suction truck suspension rod, suction truck clean water tank, suction truck sight window, suction truck vacuum pressure gauge, and suction truck pipe network system.【Te
  Contact Now
Relate News
A suction truck is a specialized vehicle mainly used for cleaning and cleaning in environments such as septic tanks, sewage ditches, and sewers. The key components of both sewage suction trucks and fecal suction trucks are vacuum suction pumps, which use the pressure difference generated by the operation of the vacuum pump to suction flowable waste. However, the sewage suction truck adopts a circular tank body with high strength and high vacuum degree, ensuring that the tank body is not flattened during operation.
Six tips for choosing a fecal suction truck Choose based on your own salary:If the salary is not high and you want to start your own business, you can choose a cheap and high-quality small three wheeled fecal suction truck; If it is used for municipal property management, it is recommended that you buy a larger suction truck, which can be registered and has a higher price.Selection of tank capacity:Small tonnage fecal suction trucks are currently popular, compact and convenient.
The three wheeled suction truck is mainly used as a specialized vehicle for cleaning and cleaning in environments such as septic tanks, sewage ditches, and sewers. Along with sprinkler trucks and garbage trucks, it is also known as one of the three major sanitation vehicles and does not need to pay purchase tax.
The cleaning and suction truck integrates flushing, dredging, suction, and reverse discharge functions.
1、 Dongfeng six blue plate cleaning and sewage truck: is in the pipeline dredging car basically modified suction pumps, suction tanks, suction piping and other equipment set of cleanup and suction of two roles in one of the special car, by two tanks, two pumps (high-pressure cleaner, vacuum suction pumps), the two pipeline system software, etc.
1、 The importance of maintaining suction trucks.The main function of a sewage suction truck is to suck up sewage and dirt, and its work content is very important. Without the help of a sewage suction truck, it is difficult to treat the sewage in the city.
The cleaning and suction truck, also known as the joint dredging truck, is a new type of specialized sanitation vehicle that combines the functions of a high-pressure cleaning truck and a suction truck. The highlight of this vehicle is its ability to clear blocked areas in the sewer that cannot be reached by human labor, hence it is called the joint dredging truck. The other functions of the car include floor flushing, sewage suction and discharge, landscaping, etc. It can be used for cleaning high-pressure pipelines.
Did you do the right thing about the maintenance of the sewage truck?Maintenance work is not only important for other types of vehicles, but also for suction trucks. When the sewage truck is running, it is necessary to ensure that the tire pressure of the vehicle is within the normal range of use. At different temperatures in different seasons, the tire pressure of the suction truck will also vary. In summer, autumn, and winter, it is important to control tire pressure.
Kitchen waste trucks, also known as swill trucks, restaurant waste trucks, and kitchen waste trucks, are a type of garbage truck used for collecting and transporting household waste, food waste (swill), and urban sludge. It is mainly used for the treatment of kitchen waste in hotels, restaurants, canteens, schools and other units. Each unit sorts the garbage and puts it into a 120 liter or 240 liter plastic garbage bin, which is then automatically placed into the tank by the garbage bin lifting device of the garbage truck.
Winter maintenance strategy for sprinkler trucks:The first step is to add antifreeze.The antifreeze and oil of the vehicle engine should be replaced promptly with a grade suitable for the local temperature, and a suitable high-quality antifreeze should be selected to avoid unnecessary losses.Step two, open the ball valve.Drain the remaining water in the tank and pipeline: Open the pipeline direct ball valve next to the three-way ball valve, and open the front flushing, rear spraying, side spraying, and water cannon ball valves to drain the remaining water.Step three, empty the remaining water