septic truck-manufacture,factory,supplier from China

Septic Cleaning Truck is widely applicable in the following scenarios:Poultry manureCatering wastewaterToiletSewage from sewers【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch347 (Extended)Product NameFecal suction truckProduct modelSGW5048GXEFTotal mass (Kg)4495Tank volume (m3)2.85Rated load capacity (Kg)2195External dimensions (mm)5050×1850×2150Curb weight (Kg)2170Cargo size (mm)××Rated passenger capacity (person) Total mass of quasi trailer (Kg) Cab capacity (persons)2Maximum load capacity of saddle (Kg) Approach Angle/Departure

Preparation before homework:The rear of the Septic Tank Cleaning Truck should be as close as possible to the work site and parked.Turn the straight through plug of the oil return tank to an angle of about 45 ° with the axis of the oil inlet pipe, and observe the flow of lubricating oil in the oil inlet pipe.Open the side door of the platform box, take out the suction hose, and swing it backwards without any bending phenomenon.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch331 (Extended)Product NameFecal suction truckProduct modelS

The application areas of Septic suction truck involve domestic sewage treatment, industrial sewage treatment, livestock waste treatment, and so on.    【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch357 Product NameFecal suction truckProduct modelSGW5070GXECA6 yellow card//SGW5042GQCA6 blue card Total mass (Kg)7360Tank volume (m3)4.5Rated load capacity (Kg)3465External dimensions (mm)5995×2100×2450Curb weight (Kg)3700Cargo size (mm)××Rated passenger capacity (person)Total mass of quasi trailer (Kg)Cab capacity (

Septic tank vacuum truck:It is an essential sanitation vehicle for urban environmental treatment. When driving a suction truck in winter, fogging of the cab glass is a common problem. If the fog is not treated, it is particularly dangerous to drive.    【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch345 (Extended)Product NameFecal suction truckProduct modelSGW5163GXEFTotal mass (Kg)16000Tank volume (m3)11.5Rated load capacity (Kg)9105,9170External dimensions (mm)7400×2500×3100Curb weight (Kg)6700Cargo size (mm)××Rated pas

Septic Vacuum Truck.They are suitable for suctioning feces, sewage, sludge and liquidsmixed with small suspended debris, and are suitable for municipal sanitation, large, medium and small industrial and mining enterprises, residential areas, schools and other place.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch346 (Extended)Product NameFecal suction truckProduct modelSGW5120GXEFTotal mass (Kg)11995Tank volume (m3)8.7Rated load capacity (Kg)6700External dimensions (mm)6800×2200×2700Curb weight (Kg)5100Cargo size (mm)××Rated passenger capacity (p

The composition of a fecal suction truck includes an oil-water separator, a water vapor separator, a dedicated vacuum fecal suction pump, a volumetric pressure gauge, a pipeline system, a suction duct, a self flow valve, a vacuum tank body, a connector (fecal window), and a fully automatic spill proof valve.Kind reminder: The entire vehicle can be sprayed in different colors The detailed parameters of the entire vehicle are as follows ↓【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandProduct model347Product NameFecal suction truck

If there is water accumulation or garbage in the water quality separator of the vacuum suction truck, it is an operational error and must be cleaned thoroughly, otherwise it will affect the service life of the vacuum pump, and in severe cases, it will immediately damage the vacuum pump.        【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch347 (Extended)Product NameFecal suction truckProduct modelSGW5071GXEFTotal mass (Kg)7360Tank volume (m3)4.6Rated load capacity (Kg)3530External dimensions (mm)5995×2000×

This vehicle is used for the collection and cleaning of feces and sewage. The main equipment is a tank and a pump. Transport medium: liquid sewage, medium density: 800 kg/cubic meter. Effective volume of the tank: 2.45 cubic meters. The tank size is (length x long axis x short axis) (mm): 2600 x 1400 x 900. Only 2800mm wheelbase is installed ABS model and manufacturer: APG3550500A, Zhejiang Asia Pacific Electromechanical Co., Ltd; ABS/ASR-12V-4S/4M, Xiangyang Dongfeng Longcheng Machinery Co., Ltd.

This vehicle is used for suction and transportation of feces. The main devices are a tank and a pump. The effective volume of the tank is 2.44 cubic meters, the medium is liquid waste, the density is 800 kg/cubic meter, and the external dimensions of the tank (mm) are long axis X short axis X tank length (1350X1000X2700). The side rear protection is welded and connected with Q235 material, and the cross-sectional size of the rear protection is 50 × 100. The height of the rear protection above the ground is 440 mm.

Can Process Customized Cleaning And Suction TrucksManufacturer's stock, model and size can be selectedCustomize products according to your needs(For detailed consultation with customer service)1. Environmental friendliness: Cleaning the suction truck can effectively avoid secondary pollution and is suitable for cleaning various liquid and semi liquid media, such as septic tanks, sewers, rainwater wells, inspection wells, sediment wells, etc. Its design avoids the pollution problems of traditional cleaning methods and improves the level of environmental hygiene.2.

The vehicle is equipped with a tank for the collection and cleaning of feces and sewage. The transport medium is liquid sewage with a density of 800 kg/cubic meter and an effective volume of 4.63 cubic meters. The external dimensions of the tank (length x long axis x short axis) (mm) are 3600 x 1600 x 1100. The vehicle only has a wheelbase of 3360mm ABS model and manufacturer correspondence: CM4XL-4S/4M/Guangzhou Ruili Kemi Automotive Electronics Co., Ltd.

Cleaning and suction truck is a widely used specialized vehicle, which is widely used for cleaning and suction in places such as sewers, manholes, septic tanks, etc.High pressure pump (usage tips):The high-pressure pump (diesel engine oil) needs to be replaced every 50 hours of operation.(Add CD15W-40 and above)2. During the use of the high-pressure pump, oil will be consumed. Keep the oil level at 2/3 position(observed through the observation port).3. Try to install clean fire water or tap water, and regularly clean the inlet filter of the high-pressure pump.4.

The suction truck is mainly used as a specialized vehicle for cleaning and cleaning in environments such as septic tanks, sewage ditches, and sewers. Along with sprinkler trucks and garbage trucks, it is also known as one of the three major sanitation vehicles. There are air holes and suction and discharge holes at the top of the tank. The air hole is connected to the water vapor separator as a channel for air to enter and exit the tank. The inlet hole is usually sealed and can be opened during maintenance.

Sale Of Fecal Suction Trucks Model selection1. Pay attention to issues such as board quality2. Selection of Vacuum Kit3. Selection of Rear Self Flow ValveCleaning and suction trucks can also be used for emergency response to sudden environmental pollution accidents, as well as for suction work in septic tanks and sewers in residential areas, engineering projects, schools, breeding farms, and other places.

Pipeline Success Truck adopts a thickened tank body, which extends its service life to a certain extent.

The sewage truck and the sewage truck share the same principle, but the sewage truck has different uses from the sewage truck. The difference lies in the fact that the tank of the sewage suction truck is a circular tank with a tighter structure, which can withstand higher pressure and provide greater suction.

Light fire truck: a fire truck with a chassis carrying capacity of only 0.5-5 tons.Medium sized fire truck: a fire truck with a chassis carrying capacity of 5-8 tons.Heavy duty fire truck: a fire truck with a chassis carrying capacity greater than 8 tons.The fire engines produced by the company include: small (mini) fire engines, medium-sized fire engines, large fire engines, water tank fire engines, foam fire engines, rescue fire engines, etc.

As a water tank fire truck, this medium-sized fire truck has the advantages of high specific power, low fuel consumption, flexible maneuverability, compact structure, high speed, centralized operation, and easy maintenance. It can be widely used in fire departments, urban and rural areas, industrial and mining enterprises and other places.

Medium Sized Self Loading And Unloading Garbage Truck Optional configuration, customized according to your needs. 【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch 375【Expansion】 Product NameHydraulic Lifter Garbage truck Product modelSGW5120TXSCA6Total mass (Kg)4495Tank volume (m3)Rated load capacity (Kg)715External dimensions (mm)5540x1860x2500Curb weight (Kg)3650Cargo size (mm)××Rated passenger capacity (person)Total mass of quasi trailer (Kg)Cab capacity (persons)2Maximum load capacity of saddle (Kg)Approach Angle/Depa

The kitchen waste truck not only optimizes the living environment and hygiene of residents, reduces the odor of kitchen waste in the air, improves the environmental sanitation working environment, and reduces the pollution caused by the dispersion of garbage everywhere.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brand Announcement batch331 (Extended)Product NameKitchen waste truckProduct modelSGW5070TCAFTotal mass (Kg)7360Tank volume (m3)Rated load capacity (Kg)2580,2330External dimensions (mm)5995×2070×2650Curb weight (Kg)4650,4900Cargo size (m

Multi functional suction truck description:Vacuum suction truck configuration: The dedicated part includes the suction truck power take-off, suction truck transmission shaft, suction truck vacuum suction pump, suction truck water gas separator, suction truck oil gas separator, suction truck multi way directional valve, suction truck suspension rod, suction truck tank body, suction truck discharge valve, suction truck suspension rod, suction truck clean water tank, suction truck sight window, suction truck vacuum pressure gauge, and suction truck pipe network system.【Te

Medium Sized Hook Arm Garbage Truck this  can be optionally equipped with ETC on-board device.

Everyone must think that buying a sprinkler truck is quite troublesome.So, how can we efficiently buy high-quality cars?Our company produces sprinkler trucks, eliminating the hassle of running around.The sprinkler truck expert beside you. 【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch347Product Namemultifunctional dust suppression vehicleProduct modelSGW5180TDYBJ6Total mass (Kg)18000Tank volume (m3)11.6Rated load capacity (Kg)11050External dimensions (mm)8160×2400×3150Curb weight (Kg)6755Cargo size (mm)××Rated passenger capacity (person)To

On the basis of the sewage suction truck, the function of high-pressure cleaning truck has been added, which can be used for both purposes, saving money and effort.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandProduct model347 (Extended)Product Namesewage suction truck Tank volume (m3)SGW5071GXWFTotal mass (Kg)7360External dimensions (mm)4.23Rated load capacity (Kg)3380Cargo size (mm)5995×2000×2600Curb weight (Kg)3850Total mass of quasi trailer (Kg)××Rated passenger capacity (person)Maximum load capacity of saddle (Kg)Cab capacity (persons)2Front/rear