sewage pump truck service near me-manufacture,factory,supplier from China

Pipeline Success Truck adopts a thickened tank body, which extends its service life to a certain extent.

The vehicle is equipped with a tank for the collection and cleaning of feces and sewage. The transport medium is liquid sewage with a density of 800 kg/cubic meter and an effective volume of 4.63 cubic meters. The external dimensions of the tank (length x long axis x short axis) (mm) are 3600 x 1600 x 1100. The vehicle only has a wheelbase of 3360mm ABS model and manufacturer correspondence: CM4XL-4S/4M/Guangzhou Ruili Kemi Automotive Electronics Co., Ltd.

New Type Of Sewage Suction VehicleFor more details, please consult our customer service! 【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandProduct model338 (Extended)Product NameSewage suction truckTank volume (m3)SGW5072GXWFTotal mass (Kg)7360External dimensions (mm)4.12Rated load capacity (Kg)3140Cargo size (mm)5995×2040×2600Curb weight (Kg)4025Total mass of quasi trailer (Kg)××Rated passenger capacity (person)Maximum load capacity of saddle (Kg)Cab capacity (persons)3Front/rear suspension (mm)Approach Angle/Departure Angle (degrees)21/14Maximum speed (k

If there is water accumulation or garbage in the water quality separator of the vacuum suction truck, it is an operational error and must be cleaned thoroughly, otherwise it will affect the service life of the vacuum pump, and in severe cases, it will immediately damage the vacuum pump.        【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch347 (Extended)Product NameFecal suction truckProduct modelSGW5071GXEFTotal mass (Kg)7360Tank volume (m3)4.6Rated load capacity (Kg)3530External dimensions (mm)5995×2000×

Sewage Transfer Truck circulates the suction pump and water tank as needed. Oil cylinder, anti overflow valve, water gas separator, also known as secondary anti overflow, hydraulic oil cylinder, multi way directional valve, ball valve, suction pipe, liquid observation mirror, pressure gauge, various accessories, etc.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch357Product NameSewage suction truckProduct modelSGW5070GXWCA6 yellow card//SGW5040GQWCA6 blue card Total mass (Kg)7360Tank volume (m3)4.23Rated load capacity (Kg)3315

Performance of cleaning and suction dual-use suction truck: The suction truck has the characteristics of suction, self suction, self discharge, and direct injection. Filling time of manure tank: ≤ 5 minutes, suction distance: ≥ 8m. It has the characteristics of long service life, fast working speed, easy operation, and convenient transportation. The sewage suction truck is mainly used to clean the sediment in urban sewers, pipelines, and clear dead corners of mud ditches. It can also be used to clean industrial drainage pipelines, walls, etc.

The main features of small fecal suction trucks are:1、Strong suction: The vacuum pump can generate strong suction and easily suck up sewage and substances. A well matched vehicle can basically fill a can in 3-8 minutes.2、Not picky about food: When the vacuum pump is suctioning, sewage and dirt do not pass through the pump body, and debris with a diameter less than 80 millimeters can be suctioned.

Fire truck function description:1. Part of it consists of a liquid tank, pump room, equipment box, power output and transmission system, pipeline system, electrical system, etc.2. The fire truck adopts a double row integrated structure, with a wide field of view and a large number of passengers, and can accommodate up to 6 people; Fire trucks can extinguish fires while in motion, with a long range and strong firefighting capabilities.3. Optional atmospheric pressure fire pump, medium and low pressure fire pump, high and low pressure fire pump.4.

The anti overflow valve of the cheap sewage suction truck can effectively prevent liquid overflow and can be equipped with a liquid full alarm device.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement Batch345 (Extended)Product Namesewage suction truckProduct modelSGW5045GXWFTotal mass (Kg)4495Tank volume (m3)2.38Rated load capacity (Kg)1815Dimensions (mm)4850×1800×2380Curb weight (Kg)2550Cargo compartment size (mm)××Rated passenger capacity (person)Total mass of quasi trailer (Kg)Cab capacity (persons)2Maximum load capacity of saddle (Kg)Approach A

The main function of Separable Vacuum Extraction Truck is a specialized vehicle for the sanitation department to extract and transport feces and other sewage. It is modified on the chassis of a second-class heavy-duty truck, and by manipulating the vacuum pump, a certain degree of vacuum is obtained in the liquid tank, so as to suck feces into the tank.

The overall design structure of the Large Scale Sewage Success Truck vehicle is reasonable, with excellent performance and flexible and convenient operation. On the basis of the sewage suction truck, the high-pressure cleaning truck functionhas been added, which saves money and energy and is cost-effective.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandProduct model357 (Extended)Product NameClean the suction truckTank volume (m3)SGW5180GQWCA6Total mass (Kg)18000External dimensions (mm)9.47Rated load capacity (Kg)7580,7645Cargo size (mm)9150,9020,8820×25

Vacuum suction truck is a new type of environmental sanitation vehicle that collects, transfers, and cleans sludge, sewage, feces, and avoids secondary pollution.

This model is based on the chassis of a cargo truck and is modified with components such as pressure tanks, vacuum suction systems, hydraulic systems, spill valves, and hand washing devices. The car has a simple appearance, reliable quality, easy operation, high suction power, and long suction range.The dedicated part of the sewage suction truck consists of a power take-off, a transmission shaft, a sewage suction pump, a pressure tank, a hydraulic system, a pipeline system, a vacuum pressure gauge, an overflow valve, and a hand washing device.

This efficient cleaning and suction truck is mainly used for sewage discharge and dredging, with the main devices being the tank body and pump.   【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandProduct model357 (Extended) Product NameClean the suction truckTank volume (m3)SGW5180GQWCA6Total mass (Kg)18000External dimensions (mm)9.47Rated load capacity (Kg)7580,7645Cargo size (mm)9150,9020,8820×2550×3350,3450Curb weight (Kg)10225Total mass of quasi trailer (Kg)××Rated passenger capacity (person) Maximum load capacity of saddle (Kg

High Horsepower Cleaning And Suction Truck also known as multifunctional suction truck or combined dredging truck. The dedicated part consists of a power take-off, transmission shaft, vacuum suction pump, water gas separator, multi way directional valve, clean water tank, window, vacuum pressure gauge, pipe network system, etc. It is used to suction sewage, sewage slurry, and suspended debris sludge, small bricks, crushed stones, etc.

Detachable Container Garbage Collector Maintenance and upkeep：Garbage trucks should be maintained strictly according to regulations, ensuring that all systems and devices are in good technical condition, fully utilizing their efficiency, reducing fuel consumption, saving expenses, and maximizing the service life of garbage trucks.（1） Chassis maintenance: The chassis should strictly follow the instructions in its user manual and undergo daily and weekly routine maintenance.（2） The maintenance of homework equipment is generally carried out in accordance with the following regulations.

As one of the environmental sanitation equipment, the road sweeper is a new and efficient cleaning device that integrates road cleaning, garbage collection, and transportation.This is its accessory:There are also vulnerable parts, if needed, you can contact our customer service! 【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch375Product NameCleaning and sweeping carProduct modelSGW5070TXSCA6Total mass (Kg)7360Tank volume (m3)Rated load capacity (Kg)1565External dimensions (mm)6560×2050×2470Curb weight (Kg)5600Cargo size (mm)××Rated pass

The multifunctional sewage suction truck is produced according to the standard, strictly following the standard production, and carefully manufactured from raw materials to production processes.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement Batch337Product Namesewage suction truckProduct modelSGW5126GXWFTotal mass (Kg)11990Tank volume (m3)8.0Rated load capacity (Kg)6210,6145Dimensions (mm)7050×2230×3050Curb weight (Kg)5650Cargo compartment size (mm)××Rated passenger capacity (person)Total mass of quasi trailer (Kg)Cab capacity (persons)2,3M

The high-end sewage suction truck has multiple advantages, making it a highly competitive model in the market. The following are its main technical advantages and configuration features:Chassis and engineThe Xuande X9 adopts the original Shaanxi Automobile Xuande new X9 semi standard top cab, with a chassis model of SX1180BP6501 and a wheelbase of 4500mm.Equipped with Yuchai YCS04200-68200 horsepower diesel engine, with a maximum torque of 720N.

This vehicle is mainly used for sewage discharge and dredging, with the main devices being tanks and pumps. There are a total of 3 tanks, including a middle sewage tank and two sides of clear water tanks.A special vehicle that combines cleaning and suction functions by installing suction pumps, suction tanks, suction pipelines, and other facilities on the basis of a high-pressure cleaning vehicle. It consists of two tanks, two pumps (high-pressure cleaning pump, vacuum suction pump), and two sets of piping systems.Installation configuration:1.

Small Sewage Success Truck dual action single top front lifting unloading system, low center of gravity and high safety of the entire vehicle.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement Batch345Product Namesewage suction truckProduct modelSGW5045GXWDTotal mass (Kg)4495Tank volume (m3)2.25Rated load capacity (Kg)1750Dimensions (mm)5470×1850×2250Curb weight (Kg)2615Cargo compartment size (mm)××Rated passenger capacity (person)Total mass of quasi trailer (Kg)Cab capacity (persons)2Maximum load capacity of saddle (Kg)Approach Angle/Departure Angl

Sewage Suction Sanitation Truck supports customized volume.We can customize the size of the cleaning and suction truck according to your different needs.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandProduct model340Product Namesewage suction truck Tank volume (m3)SGW5160GXWDF6Total mass (Kg)16200External dimensions (mm)11.1Rated load capacity (Kg)8680,8615Cargo size (mm)7450×2510×3150Curb weight (Kg)7390Total mass of quasi trailer (Kg)××Rated passenger capacity (person)Maximum load capacity of saddle (Kg)Cab capacity (persons)2,3Front/rear suspension (

Sewage treatment suction truck：Our products are diverse, and we can customize them according to your needs.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandProduct model346Product Namesewage suction truckTank volume (m3)SGW5120GXWHF6Total mass (Kg)11920External dimensions (mm)7.8Rated load capacity (Kg)6025Cargo size (mm)6910,6900×2350×3050Curb weight (Kg)5700Total mass of quasi trailer (Kg)××Rated passenger capacity (person)Maximum load capacity of saddle (Kg)Cab capacity (persons)3Front/rear suspension (mm)Approach Angle/Departure Angle (degrees)20/13Maximum spee

Precautions for pipeline dredging, cleaning and suction truckThe cleaning and suction functions are not used simultaneously, and the two tanks cannot be fully loaded at the same time.The suction pump has no suction force, and the suction force of the suction pump becomes weaker:1. Firstly, self check: Close all ball valves and back covers to hold pressure and check if the pressure values are within the normal range (negative pressure of oil pump: 0.06 value, water circulation pump: 0.06-0.1 value)2. Check if the oil supply is normal3.