sewage pump truck-manufacture,factory,supplier from China

Crawler type emergency rescue pump trucks are developed based on the characteristics of suddenness, urgency, diversity of operations, and social impact caused by long-term storage, lack of maintenance, harsh operating environment, and special operating requirements of rescue and disaster relief equipment.

A suction truck is a specialized vehicle mainly used for cleaning and cleaning in environments such as septic tanks, sewage ditches, and sewers. The key components of both sewage suction trucks and fecal suction trucks are vacuum suction pumps, which use the pressure difference generated by the operation of the vacuum pump to suction flowable waste. However, the sewage suction truck adopts a circular tank body with high strength and high vacuum degree, ensuring that the tank body is not flattened during operation.

1、 Why can't the high-pressure pump generate pressure?1. Check if the pipeline between the water outlet and the high-pressure pump is blocked, causing insufficient water supply.2. Check for garbage in the filter and clean the filter.3. Observe whether the pump body and high-pressure pipe are shaking. If there is shaking, it indicates that there is air in the pipeline. It is necessary to open the high-pressure three-way valve of the high-pressure pump without installing a nozzle, and then add the throttle to discharge the air in the pipeline until the high-pressure pipe flows normally.4.

1、 The importance of maintaining suction trucks.The main function of a sewage suction truck is to suck up sewage and dirt, and its work content is very important. Without the help of a sewage suction truck, it is difficult to treat the sewage in the city.

matters needing attention:1. The swing arm garbage truck must fully press the clutch pedal when opening or closing the power take-off. It is strictly prohibited to directly engage the power take-off, as it may cause damage to the gearbox gears.2. During prolonged operation of the swing arm garbage truck, please turn off the power take-off. When driving normally, the high speed of the power take-off can easily cause the hydraulic pump to burn out. 3. Regularly replace the hydraulic oil of the swing arm garbage truck.

Did you do the right thing about the maintenance of the sewage truck?Maintenance work is not only important for other types of vehicles, but also for suction trucks. When the sewage truck is running, it is necessary to ensure that the tire pressure of the vehicle is within the normal range of use. At different temperatures in different seasons, the tire pressure of the suction truck will also vary. In summer, autumn, and winter, it is important to control tire pressure.

The cleaning and suction truck adopts domestically advanced vacuum pumps with high suction power and long suction range, which are particularly suitable for suction, transportation, and discharge of sediment in sewers. Its vacuum degree is high, tonnage is large, efficiency is high, and it has a wide range of applications. The main technical parameters include the vehicle product model, chassis model, wheelbase, total mass, rated load capacity, etc.

The reason for the lack of pressure in the hydraulic system(1) The oil level in the hydraulic oil tank is too low;(2) Hydraulic oil filter clogged;(3) Damage such as gear pump leakage and pump shaft fracture;(4) Internal leakage of three-way shuttle valve and stuck valve core;(5) The main overflow valve and directional valve core are stuck or worn, the directional valve coil is burnt out, and the power supply is abnormal;(6) Internal leakage of the back pressure valve of the sweeping disc and suction nozzle;(7) Oil leakage and pressure relief inside the hydraulic manifold block.processing meth

The application scenarios of sewage suction vehicles are very wide, mainly including the following aspects:   1.Urban sanitation: Suction trucks play an important role in urban sanitation. It can quickly remove dust and garbage from roads, squares, parking lots, and other places, keeping the urban environment clean.

1. Preparation before homework(1) The rear of the sewage suction truck should be as close as possible to the work site and parked. (2) Turn the straight through plug of the oil return tank to an angle of about 45 ° with the axis of the oil inlet pipe, and observe the flow of lubricating oil in the oil inlet pipe. (3) Open the side door of the platform box, take out the suction hose, and swing it backwards without any bending phenomenon. 2.