Small And Powerful Sewage Suction Truck-manufacture,factory,supplier from China

Small and powerful sewage suction trucks can easily suck, transport, and discharge sludge, silt, stones, etc.

The advantages of a powerful suction truck mainly include the following aspects:Widely applicable working conditions:The applicable working conditions are more extensive. Equipped with dual rear axles and differential locks, it can provide sufficient grip even on muddy or bumpy roads, helping the vehicle quickly get out of the trap and continue driving.Strong power and handling:Equipped with Yuchai YCS06245-60 engine, it has a displacement of 6.23L and a maximum torque of 850N · m.

Small Sewage Success Truck dual action single top front lifting unloading system, low center of gravity and high safety of the entire vehicle.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement Batch345Product Namesewage suction truckProduct modelSGW5045GXWDTotal mass (Kg)4495Tank volume (m3)2.25Rated load capacity (Kg)1750Dimensions (mm)5470×1850×2250Curb weight (Kg)2615Cargo compartment size (mm)××Rated passenger capacity (person)Total mass of quasi trailer (Kg)Cab capacity (persons)2Maximum load capacity of saddle (Kg)Approach Angle/Departure Angl

The working principle of the sewage suction truck:Due to the continuous immersion of the fecal suction hose on the liquid surface, the air inside the fecal tank becomes thinner and thinner as it cannot be replenished. As a result, the pressure inside the tank is lower than atmospheric pressure, and the fecal liquid enters the tank through the fecal suction hose under atmospheric pressure.

The vacuum suction truck has high suction efficiency, self discharge, self suction and self dumping functions, simple operation, convenient transportation, and strong power.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement Batch345 (Extended)Product Namesewage suction truckProduct modelSGW5164GXWFTotal mass (Kg)16000Tank volume (m3)11.0Rated load capacity (Kg)8480Dimensions (mm)7990×2450×3350Curb weight (Kg)7325Cargo compartment size (mm)××Rated passenger capacity (person) Total mass of quasi trailer (Kg) Cab capacity (persons)3Maxim

Small Fecal Suction Truck The whole vehicle picture is shown below 【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch331Product NameFecal suction truckProduct modelSGW5047GXEFTotal mass (Kg)4495Tank volume (m3)2.06Rated load capacity (Kg)1570External dimensions (mm)5650×1900×2300Curb weight (Kg)2600Cargo size (mm)××Rated passenger capacity (person)Total mass of quasi trailer (Kg)Cab capacity (persons)2+3Maximum load capacity of saddle (Kg)Approach Angle/Departure Angle (degrees)20/14Front/rear suspension (mm)1130/1670Axle load (Kg)1617/28

The main features of small fecal suction trucks are:1、Strong suction: The vacuum pump can generate strong suction and easily suck up sewage and substances. A well matched vehicle can basically fill a can in 3-8 minutes.2、Not picky about food: When the vacuum pump is suctioning, sewage and dirt do not pass through the pump body, and debris with a diameter less than 80 millimeters can be suctioned.

Cleaning and suction trucks are an important component of sanitation vehicles, with multiple functions such as dredging, cleaning, and suction. They are mostly used for municipal sanitation, factory sewage treatment, etc. In terms of volume, there are many choices for cleaning and suction trucks, ranging from 2 to more than 20. Generally, large cleaning and suction trucks are mostly used for enterprise sewage treatment, while small and medium-sized cleaning and suction trucks are mostly used for municipal sanitation.

The benefits of road sweepers are mainly reflected in the following aspects:1. Strong power and high efficiencyBy utilizing advanced engine technologies such as the 154 horsepower CA4DD engine from Deutz and the 170 horsepower B170 engine from Dongfeng Cummins, powerful power is provided to ensure excellent performance under various working conditions. The engine has the characteristics of low fuel consumption and minimal maintenance, with an overall lifespan of over 1000000 kilometers.2.

The Heavy Duty Cleaning and Success Truck is used for suctioning feces, sewage, sludge, and liquids mixed with small suspended solids. High suction efficiency, self suction and self discharge.The tank body of the cleaning and suction truck is made of high-quality sheet metal from Wuhan Iron and Steel Group, with a 8mm boiler steel plate for the head. It is cylindrical in shape, and the surface of the tank body is shot blasted and treated with rust prevention. The paint adopts a 360 degree baking process without any dead corners.

The benefits of small garbage trucks mainly lie in improving efficiency, reducing pollution, lowering costs, enhancing safety, strong adaptability, as well as aesthetics and quality.【Technical parameters of the entire vehicle】 Product trademarkXiangnongda brandAnnouncement batch346 (Extended)Product NameGarbage transfer truckProduct modelSGW5033ZLJFTotal mass (Kg)3495Tank volume (m3)Rated load capacity (Kg)1365External dimensions (mm)4900×1750×2150,2450Curb weight (Kg)2000Cargo size (mm)××Rated passenger capacity (person)Total mass of quasi trailer (Kg)Cab capacity (persons)2Max

The tank of the high-pressure cleaning suction truck has a lifting and self dumping function.The cleaning and suction truck utilizes powerful high-pressure water jet technology to clean in a high-pressure, low flow manner, effectively removing dirt and saving water It can clean the old stains on the pipe wall and road surface to achieve the best flushing effect and clear the sewer.

High Horsepower Cleaning And Suction Truck also known as multifunctional suction truck or combined dredging truck. The dedicated part consists of a power take-off, transmission shaft, vacuum suction pump, water gas separator, multi way directional valve, clean water tank, window, vacuum pressure gauge, pipe network system, etc. It is used to suction sewage, sewage slurry, and suspended debris sludge, small bricks, crushed stones, etc.

Main products of the company: sprinkler trucks, fecal suction trucks, sewage suction trucks, garbage trucks, high-pressure cleaning trucks,fire trucks, electric road sweepers, garbage bins and other large and small electric sanitation equipment and accessories, supporting customized sanitation vehicles. Welcome to visit and guide.The cleaning and suction truck integrates flushing, dredging, suction, and reverse discharge functions.

This efficient cleaning and suction truck is mainly used for sewage discharge and dredging, with the main devices being the tank body and pump.   【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandProduct model357 (Extended) Product NameClean the suction truckTank volume (m3)SGW5180GQWCA6Total mass (Kg)18000External dimensions (mm)9.47Rated load capacity (Kg)7580,7645Cargo size (mm)9150,9020,8820×2550×3350,3450Curb weight (Kg)10225Total mass of quasi trailer (Kg)××Rated passenger capacity (person) Maximum load capacity of saddle (Kg

Small sprinkler trucks are used in urban roads, large factory areas, military units, gardens and other units to clean road surfaces, maintain hygiene, prevent dust, water, spray pesticides, etc., in order to achieve the effect of beautifying the environment.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement batch374Product Namewatering lorry Product modelSGW5030GPSYT6Total mass (Kg)3495Tank volume (m3)2Rated load capacity (Kg)1815External dimensions (mm)5300×1750×2080Curb weight (Kg)1550Cargo size (mm)××Rated passenger capacity (person)Tot

The multifunctional sewage suction truck is produced according to the standard, strictly following the standard production, and carefully manufactured from raw materials to production processes.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement Batch337Product Namesewage suction truckProduct modelSGW5126GXWFTotal mass (Kg)11990Tank volume (m3)8.0Rated load capacity (Kg)6210,6145Dimensions (mm)7050×2230×3050Curb weight (Kg)5650Cargo compartment size (mm)××Rated passenger capacity (person)Total mass of quasi trailer (Kg)Cab capacity (persons)2,3M

The anti overflow valve of the cheap sewage suction truck can effectively prevent liquid overflow and can be equipped with a liquid full alarm device.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandAnnouncement Batch345 (Extended)Product Namesewage suction truckProduct modelSGW5045GXWFTotal mass (Kg)4495Tank volume (m3)2.38Rated load capacity (Kg)1815Dimensions (mm)4850×1800×2380Curb weight (Kg)2550Cargo compartment size (mm)××Rated passenger capacity (person)Total mass of quasi trailer (Kg)Cab capacity (persons)2Maximum load capacity of saddle (Kg)Approach A

The overall design structure of the Large Scale Sewage Success Truck vehicle is reasonable, with excellent performance and flexible and convenient operation. On the basis of the sewage suction truck, the high-pressure cleaning truck functionhas been added, which saves money and energy and is cost-effective.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandProduct model357 (Extended)Product NameClean the suction truckTank volume (m3)SGW5180GQWCA6Total mass (Kg)18000External dimensions (mm)9.47Rated load capacity (Kg)7580,7645Cargo size (mm)9150,9020,8820×25

The high-end sewage suction truck has multiple advantages, making it a highly competitive model in the market. The following are its main technical advantages and configuration features:Chassis and engineThe Xuande X9 adopts the original Shaanxi Automobile Xuande new X9 semi standard top cab, with a chassis model of SX1180BP6501 and a wheelbase of 4500mm.Equipped with Yuchai YCS04200-68200 horsepower diesel engine, with a maximum torque of 720N.

Sewage Suction Sanitation Truck supports customized volume.We can customize the size of the cleaning and suction truck according to your different needs.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandProduct model340Product Namesewage suction truck Tank volume (m3)SGW5160GXWDF6Total mass (Kg)16200External dimensions (mm)11.1Rated load capacity (Kg)8680,8615Cargo size (mm)7450×2510×3150Curb weight (Kg)7390Total mass of quasi trailer (Kg)××Rated passenger capacity (person)Maximum load capacity of saddle (Kg)Cab capacity (persons)2,3Front/rear suspension (

Sewage treatment suction truck：Our products are diverse, and we can customize them according to your needs.【Technical parameters of the entire vehicle】Product trademarkXiangnongda brandProduct model346Product Namesewage suction truckTank volume (m3)SGW5120GXWHF6Total mass (Kg)11920External dimensions (mm)7.8Rated load capacity (Kg)6025Cargo size (mm)6910,6900×2350×3050Curb weight (Kg)5700Total mass of quasi trailer (Kg)××Rated passenger capacity (person)Maximum load capacity of saddle (Kg)Cab capacity (persons)3Front/rear suspension (mm)Approach Angle/Departure Angle (degrees)20/13Maximum spee

The main purpose of this vehicle is for cleaning and suction of sewage. The dedicated devices are vacuum pumps and tanks. The total capacity of the sewage tank is 7.45 cubic meters. The effective volume of the sewage tank is 7.10 cubic meters. The medium is liquid sewage with a density of 800 kg/cubic meter.

The modified part of this product mainly consists of the tank body, hydraulic opening tank door, suction pipe system, hydraulic system, and operating system.1、The sewage tank is equipped with a liquid level indicator, which is made of 6mm high-quality steel plate rolled and welded.The end is welded with a 6mm thick high-quality steel plate elliptical head. To improve the strength and rigidity of the tank,there are reinforcement plates.