water sprinkler truck-manufacture,factory,supplier from China

Winter maintenance strategy for sprinkler trucks:The first step is to add antifreeze.The antifreeze and oil of the vehicle engine should be replaced promptly with a grade suitable for the local temperature, and a suitable high-quality antifreeze should be selected to avoid unnecessary losses.Step two, open the ball valve.Drain the remaining water in the tank and pipeline: Open the pipeline direct ball valve next to the three-way ball valve, and open the front flushing, rear spraying, side spraying, and water cannon ball valves to drain the remaining water.Step three, empty the remaining water

Product features are described as follows:1、sprinkler: also known as green sprinkler, multi-functional dust suppression vehicle, clean water transportation vehicle. The car is suitable for all kinds of road washing, watering trees, green belts, lawn greening, road washing, factory and mining enterprises, construction and dust reduction, high-altitude construction washing. It has the functions of sprinkling, dust reduction, high and low level spraying, pesticide spraying, guardrail washing, etc.

Driving sanitation water trucks requires constant caution.Be cautious not only when driving, but also before driving, carefully confirming whether there are any abnormalities in important parts.  1、 Confirm the status of the pressure gaugeThe pressure gauge of the sanitation sprinkler truck is an important indicator. Before driving, drivers should confirm that the pressure gauge pointer is in the green area, and at the same time, the buzzer stops sounding the alarm, in order to drive normally. It is strictly prohibited to drive under insufficient air pressure.

Precautions for sprinkler truck:1. Personnel are not allowed to get on or off equipment while driving, and no one is allowed to stand outside the cab for maintenance or other work.2. No other unrelated personnel are allowed to ride the water truck.3. Do not drive on ground with a transverse slope exceeding 10 ° and a longitudinal slope exceeding 30 °, and do not ride higher than the chassisStones and other materials are not allowed to turn off the engine or slide in neutral.4. When using a high-pressure water cannon, it is not allowed to spray on people or live equipment.5.

The function of a sprinkler truck:Sprinkler trucks are mainly used for spraying, cleaning, dust suppression, and spraying pesticides on urban roads, landscaping, or in factories, and are an essential part of environmental sanitation vehicles. The sprinkler truck itself has some special components (such as the waterway system) that require special maintenance, and the maintenance method is greatly affected by seasonality. Specific maintenance methods:1. Engine maintenanceTime: It is recommended to have maintenance every 5000 kilometers.

Water pollution has been a major problem for the environmental protection department, polluted water seriously affects the health of local residents, as well as crop pollution residues.

The three wheeled suction truck is mainly used as a specialized vehicle for cleaning and cleaning in environments such as septic tanks, sewage ditches, and sewers. Along with sprinkler trucks and garbage trucks, it is also known as one of the three major sanitation vehicles and does not need to pay purchase tax.

1、 Why can't the high-pressure pump generate pressure?1. Check if the pipeline between the water outlet and the high-pressure pump is blocked, causing insufficient water supply.2. Check for garbage in the filter and clean the filter.3. Observe whether the pump body and high-pressure pipe are shaking. If there is shaking, it indicates that there is air in the pipeline. It is necessary to open the high-pressure three-way valve of the high-pressure pump without installing a nozzle, and then add the throttle to discharge the air in the pipeline until the high-pressure pipe flows normally.4.

In terms of usage:The suction truck is mainly a new type of sanitation truck used for collecting, transferring, cleaning, and transporting sludge and sewage to avoid secondary pollution. The suction truck adopts advanced domestic vacuum pumps with high suction power and long suction distance, which are particularly suitable for the suction, transportation and discharge of sediment in sewers, especially for large objects such as sewage cement, sludge, stones, bricks, etc.High pressure cleaning vehicles use the strong pressure generated by high-pressure water flow to break through bloc

Hook arm garbage truck:Also known as a detachable garbage truck, it is mainly used for collecting and transporting various types of garbage in municipal sanitation, property management and other places. The garbage truck can be completely separated from the chassis, and has the advantages of reasonable structure, easy operation, stability, high efficiency, good sealing performance, and convenient dumping. It can achieve joint operation of one vehicle and multiple garbage trucks, circular transportation, and fully improve the transportation capacity of the vehicle.