in water truck-manufacture,factory,supplier from China

 Shandong Xiangnong Special Vehicle Co., Ltd. organized enterprise personnel to attend the 20th China (Liangshan) Special Vehicle ExhibitionSince its establishment, the China Liangshan Special Purpose Vehicle Exhibition has been an important platform for communication in the domestic and international special purpose vehicle industry. It not only showcases the achievements of China's specialized automobile industry, but also provides a compass for the development trend of the global specialized automobile industry.

The use of a driving sweeper requires regular maintenance, and daily maintenance is very important for it, otherwise it will affect its service life. As a popular cleaning equipment nowadays, any driving sweeper is no exception.Daily inspection items1. Check the height of the side brush and main brush above the ground before using a driving style sweeping car. Check daily whether the driver's sweeping brush is wrapped with wire, ropes, or other objects. (Pay attention to the position of the square holes on both sides of the main brush.

With "fiery eyes" to automatically identify obstacles, it can operate continuously for 16 hours at most and save 80% of labor costs. ...... On June 30, a number of driverless intelligent sweepers appeared on the streets of Lingang new area, which were independently developed by Youdao Zhitou. This is a new generation of driverless pure electric sweepers independently developed by Youdao Zhitou.

Water pollution has been a major problem for the environmental protection department, polluted water seriously affects the health of local residents, as well as crop pollution residues.

Winter maintenance strategy for sprinkler trucks:The first step is to add antifreeze.The antifreeze and oil of the vehicle engine should be replaced promptly with a grade suitable for the local temperature, and a suitable high-quality antifreeze should be selected to avoid unnecessary losses.Step two, open the ball valve.Drain the remaining water in the tank and pipeline: Open the pipeline direct ball valve next to the three-way ball valve, and open the front flushing, rear spraying, side spraying, and water cannon ball valves to drain the remaining water.Step three, empty the remaining water

Driving sanitation water trucks requires constant caution.Be cautious not only when driving, but also before driving, carefully confirming whether there are any abnormalities in important parts.  1、 Confirm the status of the pressure gaugeThe pressure gauge of the sanitation sprinkler truck is an important indicator. Before driving, drivers should confirm that the pressure gauge pointer is in the green area, and at the same time, the buzzer stops sounding the alarm, in order to drive normally. It is strictly prohibited to drive under insufficient air pressure.

Precautions for sprinkler truck:1. Personnel are not allowed to get on or off equipment while driving, and no one is allowed to stand outside the cab for maintenance or other work.2. No other unrelated personnel are allowed to ride the water truck.3. Do not drive on ground with a transverse slope exceeding 10 ° and a longitudinal slope exceeding 30 °, and do not ride higher than the chassisStones and other materials are not allowed to turn off the engine or slide in neutral.4. When using a high-pressure water cannon, it is not allowed to spray on people or live equipment.5.

Product features are described as follows:1、sprinkler: also known as green sprinkler, multi-functional dust suppression vehicle, clean water transportation vehicle. The car is suitable for all kinds of road washing, watering trees, green belts, lawn greening, road washing, factory and mining enterprises, construction and dust reduction, high-altitude construction washing. It has the functions of sprinkling, dust reduction, high and low level spraying, pesticide spraying, guardrail washing, etc.

1、 Why can't the high-pressure pump generate pressure?1. Check if the pipeline between the water outlet and the high-pressure pump is blocked, causing insufficient water supply.2. Check for garbage in the filter and clean the filter.3. Observe whether the pump body and high-pressure pipe are shaking. If there is shaking, it indicates that there is air in the pipeline. It is necessary to open the high-pressure three-way valve of the high-pressure pump without installing a nozzle, and then add the throttle to discharge the air in the pipeline until the high-pressure pipe flows normally.4.

On October 27th, Bob, a customer from Russia, visited our company and was warmly received by our manager and translator Allan. Both parties had in-depth business cooperation negotiations, and during on-site visits to our production line and workshop, the customer highly praised our company's professional capabilities and product quality. The customer first visited our production workshop to gain a deeper understanding of the entire process from pre assembly to finished products.