Sewage Vacuum Truck

This vehicle is suitable for municipal sanitation, large, medium and small industrial and mining

enterprises, residential areas, schools, septic tank cleaning and transportation, urban pipeline

cleaning and dredging, factory sludge cleaning, etc. In emergency situations, it can transport

clean water for firefighting.


Contact Now E-Mail Telephone
Product Details

Vacuum suction truck is a new type of environmental sanitation vehicle that collects, 

transfers, and cleans sludge, sewage, feces, and avoids secondary pollution. It is also 

known as one of the three major environmental sanitation vehicles, along with sprinkler 

trucks and sweeping trucks.

Fecal suction truck.jpg Fecal suction truck.jpg

Fecal suction truck.jpg Fecal suction truck.jpg

Kind reminder: The entire vehicle can be sprayed in different colors


The detailed parameters of the entire vehicle are as follows ↓

[Vehicle technical parameters] [Technical parameters of the entire vehicle]

Product trademark

 

XiangNong da card

 

Announcement batch

 

365 (Extended)

 

product name

 

Sewage Suction Truck

product model

 

SGW5163GXWF

gross mass (Kg)

 

16000

Tank volume (m3)

 

10.52

Rated load mass (Kg)

 

8405

Overall dimensions (mm)

 

7700,8050×2500×3300

Preparation mass (Kg)

 

7400

Goods Chamber Size (mm)

 

××

Rated passenger capacity (person)

 


Quasi-trailer total mass (Kg)

 


Number of passengers (person)

 

3

Maximum saddle load mass (Kg)

 


Approach angle / departure angle of (°)

 

20/11,20/10

Front suspension / rear suspension (mm)

 

1235/2265,1235/2315

axle weight (Kg)

 

5400/10600

Top vehicle speed (Km/h)

 

80

remarks

remarks

The vehicle special device: tank body and pump, mainly used for sewage sludge suction, clear fishing, loading and unloading, etc. Transportation medium: liquid dirt, medium density: 800 kg / m 3; total capacity of tank: 10.52 m 3, effective volume: 10.5 m 3. Length (mm) / wheelbase (mm) / tank shape size (straight length diameter) (mm) correspondence: 8050 / 4500 / 47001700,7700 / 42000 / 44001700. Protective material: Q235, connection mode: side and rear lower protection are welded connection, rear lower protection section size (mm): 12050. rear lower protection height from the ground (mm):440.ABS model is CM4XL-4S / 4M, manufactured by Guangzhou Ruili Automotive Electronics Co., LTD., select the fuel tank position with the chassis. Select the pipe port size, expand the upper flip frame. Select the fresh air grille along with the chassis. Optional new front grille and new logo.

 

[Chassis technical parameters]

Chassis model

 

BJ5164JQZHPDD-01

Chassis name

 

Car crane chassis

 

brand name

 

Fukuda card

 

manufacturing enterprise

 

Beiqi Foton Motor Co., Ltd

 

number of axles

 

2

Number of tires

 

6

wheel base (mm)

 

4200,4500,3700,3900

tyre size

 

10.00R20 18PR,9.00R20 16PR

Number of steel plate spring sheets

 

10/12+9

front gauge (mm)

 

1728,1740,1760,1780

Fuel types

 

diesel oil

 

rear track (mm)

 

1760,1780,1728,1740

Emission basis standard

 

Country GB3847-2005, GB17691-2018

 

engine type

 

Engine production enterprise

 

displacement (ml)

 

power (Kw)

 

WP3NQ160E61

WP4.1NQ190E61

D30TCIF1

Weichai Power Co., LTD

Weichai Power Co., LTD

Kunming Yunnei Power Co., LTD

 

2970

4088

2977

118

140

125


 Product usage precautions ↓

1> The oil level in the oil-gas separator should not be lower than the middle position of the observation hole 

or the tee position of the oil pipe, otherwise it will damage the vacuum pump.

2> Apply antifreeze engine oil when the outdoor temperature is below 0 degrees Celsius, and use diesel 

engine oil between 0 and 10 degrees Celsius

3> When accidentally pumping sewage or manure into the pump, it should be cleaned up and replaced with 

new engine oil in a timely manner.

4> It is strictly prohibited for objects other than air lubricating oil to enter the pump, otherwise the responsibility

 shall be borne by oneself.

5> This pump cannot pump corrosive gases such as acid, concentrated alkali, and other explosive gases.


The pictures of commonly used accessories are as follows ↓

Parts.pngParts.pngParts.pngParts.png

Parts.pngParts.pngParts.pngParts.png

Parts.pngParts.pngParts.pngParts.png

Parts.pngParts.pngParts.pngParts.png

Parts.pngParts.pngParts.pngParts.png


Company scale display (partial) pictures ↓

Factory photos.pngFactory photos.png

Factory photos.pngFactory photos.png

Factory photos.pngFactory photos.png 


Workshop process pictures (partial) display ↓ 

Workshop photos.pngWorkshop photos.png

Workshop photos.pngWorkshop photos.png

Workshop photos.pngWorkshop photos.png


FAQ

Q:Are you manufacturer?

A: Yes, we are factory with more than 20 years of manufacturing experience.

Q:What is your terms of payment?

A: T/T in advance or L/C at sight.(as deposit, and 70% before delivery. We'll show you 

the photos of the products and

packagesbefore you pay the balance.)

Q:What is your terms of delivery?

A: EXW, FOB, CFR, CIF.

Q:What is the warranty of our machine?

A:Our main machine enjoys a 1 year warranty, during this time all accessories broken 

can be changed for anew one.

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are

not in stock, it is according to quantity.

Q:How do you make our business long-term and good relationship?

A:We keep good quality and competitive price to ensure our customers benefits;

Q: Why do you want to buy from us instead of other suppliers?

A: The limited company is located in Jining City, Shandong Province. We specialize in 

producing environmental protection equipment and machinery. With an experienced 

professional team, our products have been exported to many countries and regions.

Q: Have you tested all the goods before delivery?

A: Yes, we have 100% testing before delivery.

Leave your messages

Related Products

Popular products

x

Submitted successfully

We will contact you as soon as possible

Close