High Pressure Cleaning Suction Truck

The high-pressure cleaning suction truck adopts high-quality and efficient high-pressure water pump (imported pump), with high outlet pressure, reliable performance, long service life, water-saving and good cleaning effect.

Contact Now E-Mail Telephone
Product Details

The high-pressure cleaning vehicle integrates flushing, dredging, suction, and reverse discharge. It is used for the suction, transportation, and discharge of various liquid and semi liquid media, as well as sludge, feces, wastewater, and other media under various ditches and channels. It can also be used for emergency response to sudden environmental pollution accidents. This will greatly improve the efficiency of cleaning and suction trucks and enhance their operational capabilities. Breaking through previous cleaning and suction truck products, through digestion and absorption, fully utilizing vacuum technology, the dual avoidance of overflow pump device can better extend the service life of the vacuum pump. The overall design structure of the vehicle is reasonable, with good performance and flexible and easy operation.

High Pressure Cleaning Suction Truck.jpg

The road high-pressure cleaning vehicle has an independent high-pressure water system driven by the secondary engine and a low-pressure water system driven by the chassis. High pressure cleaning is efficient and water-saving, with a long cleaning distance, suitable for the long distance of adding water on highways; Low pressure waterway greening irrigation device, suitable for low-speed driving conditions when irrigating highway green belts; The spray system can spray dust, adjust air humidity and spray air disinfectant. The vehicle is centrally controlled in terms of electricity, fluid, and gas, and has a good human-machine interface for easy and flexible operation. The driver can complete various actions in the cab equipped with air conditioning, reducing the driver's labor intensity and making it safer and more comfortable.

High Pressure Cleaning Suction Truck.jpg

The high-pressure washing vehicle is equipped with a sprinkler, which is equipped with a green sprinkler, forward flushing, rear spraying and side spraying. It can carry out green watering, spray, dust suppression and high-pressure washing of the road surface. It can also be equipped with a dirt absorption function, which integrates cleaning and dirt absorption. It uses a high-pressure water pump to pump water from the tank, and the discharged high-pressure water is pressed towards the nozzle through a high-pressure hose. The reaction of spraying water backwards from the hole of the high-pressure nozzle causes the nozzle to enter the deep part of the sewer with a hose; Simultaneously flushing the sludge in the sewer, allowing it to flow downstream into the sink to achieve the purpose of cleaning and circulation.

High Pressure Cleaning Suction Truck.jpg

【Technical parameters of the entire vehicle】

Product trademark

Xiangnongda brand

Announcement Batch

331 (Extended)

Product Name

Clean the suction truck

Product model

SGW5073GQWF

Total mass (Kg)

7360

Tank volume (m3)

3.08

Rated load capacity (Kg)

2350

Dimensions (mm)

5995×2040×2650

Curb weight (Kg)

4815

Cargo compartment size (mm)

××

Rated passenger capacity (person)


Total mass of quasi trailer (Kg)


Cab capacity (persons)

3

Maximum load capacity of saddle (Kg)


Approach Angle/Departure Angle (degrees)

21/16

Front suspension/rear suspension (mm)

1120/1515

Axle load (Kg)

2640/4720

Maximum speed (Km/h)

95

remarks

This vehicle is mainly used for sewage discharge and dredging, with the main devices being tanks and pumps Effective volume of sewage tank: 3.08 cubic meters, medium: liquid waste, density: 800 kg/cubic meter, external dimensions of tank body (straight section length x diameter) (mm): 3100 × 1200. Effective volume of clean water tank body: 1.1 cubic meters, transport medium: water, density: 1000 kg/cubic meter, load capacity: 1100 (kg). The cross-section of the clean water tank is composed of arcs and polygons, and the external dimensions (length x width x height) (mm): 1900 × 580 × 745. Sewage tank and clean water tank cannot be loaded and transported at the same time The side rear protection is welded with Q235 material, and the cross-sectional size of the rear protection (mm) is 50 × 120. The height of the rear protection above the ground (mm) is 450 The ABS model is CM4XL-4S/4M, and the manufacturer is Guangzhou Ruili Kemi Automotive Electronics Co., Ltd Optional front bumper with chassis

【Chassis Technical Parameters】

Chassis Model

BJ1073VDJDA-01

Chassis name

Truck chassis

Trademark name

Futian brand

manufacturing enterprise

Beiqi Foton Motor Co., Ltd

Number of axes

2

Number of tires

6

Wheelbase (mm)

3360

Tire specifications

7.00R16LT 14PR,7.50R16LT 12PR

Number of steel plate springs

3/6+6

Front wheel base (mm)

1715

Fuel type

diesel oil

Rear wheel base (mm)

1590,1800

Emission standards

GB3847-2005,GB17691-2018 National VI

Engine model

Engine manufacturing enterprises

Emissions(ml)

Power (Kw)

Q28-130E60

Q28-130C60

Anhui Quanchai Power Co., Ltd

Anhui Quanchai Power Co., Ltd

2800

2800

96

96

The high-pressure nozzle of the pipeline dredging vehicle has no scattering, low pressure loss, no rust on the nozzle, long service life, and fully utilizes the kinetic energy of high-pressure water flow to clean in a high-pressure, low flow manner. Hydraulic components with stable and reliable performance. The high-pressure cleaning vehicle uses a sandwich power take-off with full power output, which avoids the loud noise, high cab temperature, and easy damage to conventional gears that may occur when other similar products use upper cover power take-off. The high-pressure cleaning vehicle has a self-priming function, making it easy to add water. It is designed with humanization, saving time and effort.

Leave your messages

Related Products

Popular products

x

Submitted successfully

We will contact you as soon as possible

Close