Small scale cleaning and suction truck
Small scale design:
Among similar models, this type of cleaning and suction truck has the smallest size, making it easy to operate on narrow roads
and environments, while also complying with the regulations for blue license plates, making it easy for C-license drivers to
handle.
Durability and reliability:
The materials and components used in the vehicle, such as aluminum alloy spill valves and high standard four axle power
take-off, ensure the durability and long-term service life of the vehicle.
Easy to maintain and upgrade:
The upper part of the vehicle is equipped with a maintenance friendly toolbox and a drain gate valve, as well as an upgradable
suction hose and other accessories, which increases the flexibility and adaptability of the vehicle.
Cleaning and suction trucks are an important component of sanitation vehicles, with multiple functions such as dredging, cleaning, and suction. They are mostly used for municipal sanitation, factory sewage treatment, etc. In terms of volume, there are many choices for cleaning and suction trucks, ranging from 2 to more than 20. Generally, large cleaning and suction trucks are mostly used for enterprise sewage treatment, while small and medium-sized cleaning and suction trucks are mostly used for municipal sanitation. There are some old residential areas in urban areas where the facilities are not fully equipped and the design is not scientific and reasonable enough. Some larger cleaning and suction trucks are difficult to enter, so some small cleaning and suction trucks are needed for sewage treatment.
The upper part adopts an integrated tank structure. Unlike previous tanks, this car's tank body is elliptical, 2.8 meters long, 1.55 meters long, and 1 meter short. It looks similar to a suction truck in appearance. The front half of the tank body is a clean water tank with a total capacity of 1.03 cubic meters and an effective volume of 0.98 cubic meters. The rear half is a sewage tank with a total capacity of 1.29 cubic meters and an effective volume of 1.23 cubic meters. The tail of the tank body is equipped with a high-pressure water pipe reel, and a well-known brand suction pump and high-pressure cleaning pump are installed in one side of the protective fence. It has the advantages of high suction, long suction range, and reliable quality. The rest are standard.
This small cleaning and suction truck has a wide range of applications, such as rural toilets, old residential areas, underground garage sewers, etc. With a small size and more flexible movements, it is a trustworthy cleaning and suction truck!
【Technical parameters of the entire vehicle】 | |||
Product trademark | Xiangnongda brand | Announcement Batch | 357 |
Product Name | Product model | SGW5040GQWEQ6 | |
Total mass (Kg) | 4495 | Tank volume (m3) | |
Rated load capacity (Kg) | 1345 | Dimensions (mm) | 5600x1900x2000 |
Curb weight (Kg) | 3020 | Cargo compartment size (mm) | ×× |
Rated passenger capacity (person) | Total mass of quasi trailer (Kg) | ||
Cab capacity (persons) | 2 | Maximum load capacity of saddle (Kg) | |
Approach Angle/Departure Angle (degrees) | 20/16 | Front suspension/rear suspension (mm) | 1190/1610 |
Axle load (Kg) | 1650/2845 | Maximum speed (Km/h) | 80,110 |
remarks | ABS model/manufacturer: APG3550500A/Zhejiang Asia Pacific Electromechanical Co., Ltd., ABS/ASR-12V-4S/4M/Xiangyang Dongfeng Longcheng Machinery Co., Ltd The side rear protection is welded with Q235 material, and the cross-sectional size of the rear protection (mm) is 100x50. The height of the rear protection above the ground (mm) is 340. The special device for this vehicle model is the tank and pump, mainly used for environmental sanitation cleaning and suction The total length of the tank is 2800mm, with a clear water tank at the front and a suction tank at the rear Total capacity of clear water tank: 1.4 cubic meters, effective volume: 1.34 cubic meters, medium: water, density: 1000 kg/cubic meter, tank dimensions (length x long axis x short axis) (mm): 1200x1550x1000. The total capacity of the suction tank is 1.7 cubic meters, with an effective volume of 1.68 cubic meters. The medium is liquid waste, with a density of 800 kg/cubic meter. The dimensions of the tank body (length x long axis x short axis) (mm): 1600x1550x1000. Two tanks cannot be used simultaneously and cannot be fully loaded at the same time Only optional 2800mm wheelbase Equipped with a speed limit device on the chassis, the speed limit is 80km/h | ||
【Chassis Technical Parameters】 | |||
Chassis Model | EQ1045SJ16DC | Chassis name | Truck chassis |
Trademark name | Dongfeng brand | manufacturing enterprise | Dongfeng Motor Group Co., Ltd |
Number of axes | 2 | Number of tires | 6 |
Wheelbase (mm) | 2800,3000,3200,3400 | ||
Tire specifications | 185R15LT 8PR,6.00R15 10PR,6.00R15LT 10PR | ||
Number of steel plate springs | 3/5 | Front wheel base (mm) | 1369,1387 |
Fuel type | diesel oil | Rear wheel base (mm) | 1242,1342,1458 |
Emission standards | GB17691-2018 National VI | ||
Engine model | Engine manufacturing enterprises | Emissions（ml） | Power (Kw) |
Q23-95E60 | Anhui Quanchai Power Co., Ltd | 2300 | 95 |
Related News
Submitted successfully
We will contact you as soon as possible
