Small and medium-sized cleaning and suction trucks
1. Flexible and convenient: The 2-cube cleaning and suction truck has a relatively small volume and compact body, which can flexibly shuttle in areas with limited space such as narrow streets, old urban areas, and residential areas, making operations more convenient and suitable for working in places where large vehicles are difficult to enter.
2. Economical and practical: The purchase cost of vehicles is relatively low, suitable for small and medium-sized environmental sanitation enterprises or engineering teams to use. Moreover, its fuel consumption is relatively low, and daily maintenance costs are also controllable. Long term use can save users a lot of costs.
3. Versatile features: This pipeline dredging vehicle combines high-pressure cleaning and vacuum suction functions, and can be used for various operations such as sewer dredging, septic tank cleaning, pipeline flushing, etc.
4. High operational efficiency: The dual pumps are independently driven, allowing for synchronous cleaning and suction operations. The suction depth and high-pressure cleaning pressure can usually meet general operational requirements, such as a suction depth of ≥ 6 meters and a high-pressure cleaning pump pressure of 16-21 MPa, which can quickly complete cleaning and suction tasks and improve work efficiency.
5. Strong adaptability: The 2-cube cleaning and suction truck has fewer road rights restrictions and can enter restricted roads in urban areas. It can adapt to different work scenarios and environmental requirements, and can play its role in urban roads, residential areas, industrial parks, etc.
The tank body of the cleaning and suction truck is divided into a clean water tank and a suction tank. The clean water tank and the suction tank are two independent tanks that cannot be fully loaded at the same time. The tank body has a lifting function and is only used during operation; When using the cleaning function, use a water tank, and when using the suction function, use a suction tank. The cleaning and suction functions cannot be used simultaneously. The tank body of a 2-cube cleaning and suction truck is generally made of 6mm thick steel, and the front and rear heads of the tank body are made of 8mm thick steel. This thickness design makes the tank very sturdy and durable.
Structural design of the tank:
1. Shape: The tank body of the pipeline dredging vehicle is usually cylindrical, with a one-time die-casting of the head. This shape is uniformly stressed, can withstand high pressure, and has a high utilization rate of internal space, making it easy to store and discharge pollutants.
2. Lifting and back cover opening: The tank body is equipped with a lifting function, controlled by a dual top hydraulic system. The back cover can be hydraulically opened and locked, making it easy to dump and clean the dirt inside the tank.
3. Anti overflow device: The top of the tank cleaning suction truck is equipped with an anti overflow valve to prevent dirt from overflowing into the vacuum pump system during the suction process, damaging the equipment, and avoiding environmental pollution caused by dirt leakage.
【Technical parameters of the entire vehicle】 | |||
Product trademark | Xiangnongda brand | Announcement Batch | 389 |
Product Name | Product model | SGW5045GQWCA6 | |
Total mass (Kg) | 4495 | Tank volume (m3) | 1.89 |
Rated load capacity (Kg) | 800 | Dimensions (mm) | 5650,5770×2030,2000×2200,2500,2100 |
Curb weight (Kg) | 3565 | Cargo compartment size (mm) | ×× |
Rated passenger capacity (person) | Total mass of quasi trailer (Kg) | ||
Cab capacity (persons) | 2 | Maximum load capacity of saddle (Kg) | |
Approach Angle/Departure Angle (degrees) | 15/10，15/9 | Front suspension/rear suspension (mm) | 1155/1695,1155/1815 |
Axle load (Kg) | 2060/2435,1750/2745 | Maximum speed (Km/h) | 95 |
remarks | Dimensions of the tank body (total length x diameter) (mm): 3100 x 1100; The front end of the tank is set as a clear water tank, and the rear end is set as a sewage tank. The length of the clear water tank is 1800mm (with the lower part of the clear water tank front end 1200mm used to install the high-pressure pump), and the rear part of the tank body 1300mm is the sewage tank The total capacity of the clear water tank is 0.84 cubic meters, with an effective capacity of 0.8 cubic meters; The total capacity of the sewage tank is 1.05 cubic meters, with an effective capacity of 1 cubic meter. The clean water tank and the suction tank are two independent tanks that cannot be fully loaded at the same time. The tanks have a lifting function and are only used during operation; When using the cleaning function, use a water tank, and when using the suction function, use a suction tank. The cleaning and suction functions cannot be used simultaneously. Side protective material Q235B, welded connection; Rear protective material Q235B, welded connection, cross-sectional dimensions (height × width): 100 × 50 (mm), ground clearance height: 350 (mm). | ||
【Chassis Technical Parameters】 | |||
Chassis Model | CA1041P40K50L1BE6A84 | Chassis name | Truck chassis |
Trademark name | liberation brand | manufacturing enterprise | China FAW Group Co., Ltd |
Number of axes | 2 | Number of tires | 6 |
Wheelbase (mm) | 2800 | ||
Tire specifications | 195/70R15 12PR,6.50R16 12PR,195/70R15 10PR,6.50R16 10PR,6.50R16LT 10PR,6.50R16C 10PR,195/70R15LT 10PR,7.00R16LT 8PR ,6.50R16LT 12PR,6.50R16C 12PR | ||
Number of steel plate springs | 3/4,3/3+1,3/3+2,3/7+3,3/1+1,1/1+1,2/3+2,5/7+6,3/3,3/4+3 | Front wheel base (mm) | 1520 |
Fuel type | diesel oil | Rear wheel base (mm) | 1475,1525 |
Emission standards | GB17691-2018国Ⅵ | ||
Engine model | Engine manufacturing enterprises | Emissions（ml） | Power (Kw) |
Q23-95E60 Q23-115E60 CA4DB1-11E6 CA4DB1-12E6 CA4DB1-13E6 Q23-110E60 Q23-132E60 | Anhui Quanchai Power Co., Ltd Anhui Quanchai Power Co., Ltd China FAW Group Co., Ltd China FAW Group Co., Ltd China FAW Group Co., Ltd Anhui Quanchai Power Co., Ltd Anhui Quanchai Power Co., Ltd | 2300 2300 2207 2207 2207 2300 2300 | 70 85 81 88 95 83 97 |
